-
Active Member
splicing iasusx3 speakers?
Hey...
I have two helmets with Sena SMH10 units. Speakers really awful. (Did all the usual ear placement, pads, etc.) Read all the great reviews here and Youtube about the IASUS X3 speakers, bought 2 pair, (costly, but WTF, it's my tunes)
and only realized the 3.5 port on the SMH10 is IN only!
Remember the MASH episode where Radar O'Reilly is reading the instructions to defuse the bomb... (but before cutting the wire...) At this point I decided to just splice the new IASUS onto the Sena speaker wire, cut both Sena and one IASUS, and now have TWO dead Sena speakers, and ONE wasted pair of expensive IASUS with no joy coming from the IASUS.
Yes, I tried ordering the Sena SMH10 A0304 jack replacement to just plug in, but Sena discontinued making them!
Has anyone been successful splicing IASUS wire to Sena wire? I was able to splice the Sena back together, (working) but no sound after splicing the IASUS back to the original.
Me big stupid head.
-
Originally Posted by boz329
Hey...
I have two helmets with Sena SMH10 units. Speakers really awful. (Did all the usual ear placement, pads, etc.) Read all the great reviews here and Youtube about the IASUS X3 speakers, bought 2 pair, (costly, but WTF, it's my tunes)
and only realized the 3.5 port on the SMH10 is IN only!
Remember the MASH episode where Radar O'Reilly is reading the instructions to defuse the bomb... (but before cutting the wire...) At this point I decided to just splice the new IASUS onto the Sena speaker wire, cut both Sena and one IASUS, and now have TWO dead Sena speakers, and ONE wasted pair of expensive IASUS with no joy coming from the IASUS.
Yes, I tried ordering the Sena SMH10 A0304 jack replacement to just plug in, but Sena discontinued making them!
Has anyone been successful splicing IASUS wire to Sena wire? I was able to splice the Sena back together, (working) but no sound after splicing the IASUS back to the original.
Me big stupid head.
https://www.amazon.com/dp/B00DSOUFTG...4K5B1E28&psc=1
I can't picture in my head what you've done but have you tried that cable?
2017 Can-Am Spyder RT
-
Very Active Member
Is it possible you reversed the wires? Would that make a difference?
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Did you compare the impedance between the Sena and your aftermarket units?
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
-
Very Active Member
I guess it is too late now, but there are plenty of cheap gender adapters for 3.5 stereo plugs.
Spliced how? Soldered or just twisted?
-
Active Member
Sena SMH10 has the two speaker wire leads coming directly from the helmet clamp. Later models allowed different setups to attach to leads like you showed me. Thanks
-
Active Member
I tried to re-splice the IASUS x3 back together again (not soldered) to restore to original condition but got no sound. Checked leads with IASUS (red/ground blue/signal) when I tried to connect to the Sena unit.
-
Active Member
There were plenty of Youtube videos recommending the Iasus for Sena. I did not realize that my Sena SMH10 3.5 jack was only for audio in, not out.
-
Active Member
Thanks for your reply. The Sena SMH10 is the earlier version that is hardwired to the speakers, not a plug in.
-
Active Member
No, saw the recommendation for the IASUS for SENA on Youtube
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|