i got my ryker rally on friday. i went with the urban camo exclusive panels as i saw the promo for the free upgrade.
when i was charged for them, i asked about the promo and my salesman said it only covered the basic stock panels.
i should have disputed that but i wasnt sure i read it correctly and that is my fault.
so i was told to take a copy of the promo to the dealer to get my money back this week.
they were bought out saturday.......
now i have no recourse as the new dealer is only getting the inventory and service dept. they dont have to honor or fix any errors or deals as everything was closed out.
atleast they are going to make sure i get my comfort seats that will be in monday, so thats a plus
it my fault for not issuing a challenge right then and having it handled but excitement and trying to get back to work got the best of me.
i am guessing i just need to move on, or does anyone have any ideas on what to do? from what experiance i have with can am customer service so far, i doubt they would do anything. the guy i talked to didnt even know about the promos when i called for clarification on what the requirements were to get the promo.
2 thoughts...
Ask the new dealer nicely if he'll hook you up, since you'll likely be back there for service.
Contact BRP directly...i think it's brpcares@brp.com or something similar...maybe they'll help.
BTW...
Raprider (Rich)
2016 Can-Am Spyder ST-S SE5 Steel Black Metallic (Blackbird)
BRP Audio, Heated Grips, Fog Lights, Passenger Backrest, Givi Saddlebags/Top Case
BajaRon Swaybar, TricLed Wide-Vu Mirrors, Lamonster Ram mount and X-grip, Sena 20S Evo Dual
TricLed Sequential Front SpyderFenderz, Dual Color Run/Brake/Turn LEDs, Brake Flasher
Kumho Ecsta AST installed on rear 4/2021
1996 Yamaha Virago 750 (Vera) - still riding
1987 Honda Shadow 500 (Shady) - sold
1982 Honda Rebel 250 (Little Reb) - sold
already talked to the new dealer, but it was the parts guy when i was trying to find out about my comfort seats.
i will be picking them up tuesday and will try to talk to a sales manager or general manager, yes i will be using them for service.
i would even settle for a credit toward merch or service
thanks for the reply and i absolutely love my ryker.
already talked to the new dealer, but it was the parts guy when i was trying to find out about my comfort seats.
i will be picking them up tuesday and will try to talk to a sales manager or general manager, yes i will be using them for service.
i would even settle for a credit toward merch or service
thanks for the reply and i absolutely love my ryker.
Dave
Well, surley NOT!! That bold bit should be 'when you ARE talking to a senior manager, you MIGHT be using them for service'.... After all, if they don't look after you now, who's to say they'll ever bother to look after you (or anyone else) by doing your servicing properly?!?
It might be at least partly 'your fault' for not challenging immediately, but in the overall scheme of things, a set of panels is a tiny hit for them while its a major hit for you, and right now, the ball is squarely in their court! By absorbing that tiny hit they can score a vast amount of good will & ongoing customer support for their business by showing that they WILL do the right thing & look after their customers...... But if they blow you off now, they not only don't get that good will & risk you telling the world they're a bunch of cheapskate lowlives, they also set a precedent for their likely future behaviour, implying 'tough luck buddy, you're on your own; and btw, any chance we get to stick it to you, we will!!'
I certainly wouldn't start off any discussion you have with them this way, be polite and give them a chance first, but if it's not looking good, it's not going to hurt you to start to introduce these thoughts into the discussion!
Last edited by Peter Aawen; 06-02-2020 at 09:21 AM.
Reason: [B]
i got my ryker rally on friday. i went with the urban camo exclusive panels as i saw the promo for the free upgrade.
when i was charged for them, i asked about the promo and my salesman said it only covered the basic stock panels.
~~~went through the same scenario when I bought mine. The dealership sales manager handled my sale so I assumed it was legit
Originally Posted by Ddorand
i am guessing i just need to move on, or does anyone have any ideas on what to do?
thanks for letting me vent and have a good day
Dave
~~~I wouldn't let it create a wedge where one shouldn't exist. Let it go. I have an idea since I had the same experience cept' the manager wrote mine up, it's legit. Besides, it's only a hundred bucks. Save your whining for a much larger farking=:-)
Others may have better and different ideas
Best,
Jake
Reddick Fla.
Never rely on the glory of the morning nor the smiles of your Mother-in-law
-Japanese Proverb
@jake i got exclusive panels and they retail for 350. the new dealer has basically told me tough poop as they dont have to honor anything from the old dealer. i emailed can am as a final try and explained to them what happened. not looking good. oh well. my sales guy is popular around here, well known. if he pops up at another bike shop i will make sure they know how he rolls.
got an email today, can am is asking the new dealer to make it right. i will get my money back for the panels. more than likely a store credit or credit toward can am accessories etc. fine with me
But be cautious in your dealings with the new ownership.
The local Moto Guzzi, Triumph, Aprilla, etc dealer changed ownership a few years ago. The original owners, the Yuli Brothers, were a pleasure to do business with. The new owner is all about $ and perhaps ego. I liked the sales manager, parts manager and service manager, but now none of those brands are in my future.
I was in an Ace Hardware Monday and found a 8mm x 80mm bolt to separate sheaves for belt removal
~~~does the OEM manual say to use bolts to separate the sheaves for belt removal Doc? Just asking, I’ve never done it that way, to R&R a CVT belt. Not that anyone asked but, anytime I’ve replaced a CVT belt on a two wheeler that used CVT for propulsion, the way I went about it (& I’ve done 3or 4 anyways) was to remove the crankshaft nut that holds the drive pulley halves together, then slide the belt free from the driven pulley
~~~does the OEM manual say to use bolts to separate the sheaves for belt removal Doc? Just asking, I’ve never done it that way, to R&R a CVT belt. Not that anyone asked but, anytime I’ve replaced a CVT belt on a two wheeler that used CVT for propulsion, the way I went about it (& I’ve done 3or 4 anyways) was to remove the crankshaft nut that holds the drive pulley halves together, then slide the belt free from the driven pulley
Best,
Jake
Reddick Fla.
Not sure the manual says to do this but its common practice on these types of clutches. On the snowmobile BRP provides a little tool (essentially a bolt with a handle) in the toolkit for this. Screw in the bolt, this splits the secondary clutch so the belt can drop in and have slack. Then pull belt off primary and secondary clutch. Put new belt on, remove bolt. Easy peasy...5 minute process.
i got my ryker rally on friday. i went with the urban camo exclusive panels as i saw the promo for the free upgrade.
when i was charged for them, i asked about the promo and my salesman said it only covered the basic stock panels.
i should have disputed that but i wasnt sure i read it correctly and that is my fault.
so i was told to take a copy of the promo to the dealer to get my money back this week.
they were bought out saturday.......
now i have no recourse as the new dealer is only getting the inventory and service dept. they dont have to honor or fix any errors or deals as everything was closed out.
atleast they are going to make sure i get my comfort seats that will be in monday, so thats a plus
it my fault for not issuing a challenge right then and having it handled but excitement and trying to get back to work got the best of me.
i am guessing i just need to move on, or does anyone have any ideas on what to do? from what experiance i have with can am customer service so far, i doubt they would do anything. the guy i talked to didnt even know about the promos when i called for clarification on what the requirements were to get the promo.
thanks for letting me vent and have a good day
Dave
How did this thread turn into CVT belt replacement.....just wondering.
Jake
The BRP tools are the 8mm bolt 529 000 088 ($12.49) and 708 200 720 ($25.99)
What I did not know
a. Must bolt be turned down at tip. An 8mm x 90mm bolt at Ace Hardware is $2.19
b. May bolt be used directly on the sheave or must it be used with part 708 200 720
Thought I saw a video on belt replacement using only the bolt, but may be mistaken.
This has been answered by CanAmRyker in a new thread: