Hyperflashing

[Rotax]

I installed an LED set up on my F3-S that allows the Led above the taillights to flash when I apply the brakes.
The only issues is that now my turn signals hyper flash.
Has anyone experienced this?
If yes, how did U get the signals back on normal flashing?
Rotax

[Copperman]

Check with either Spyderpops or Lamonster Garage. They have the directions to stop the hyperflashing.

[Stubby]

With the engine running, hold the emergency flasher button down for 30 seconds. Worked for me.

[Spyder_Cowgirl]

Lamont has a video ... here's a link (it's more than just holding the flasher button down; you also have to reprogram the flash).

http://www.lamonstergarage.com/news/...-led-lighting/

All the best ... Ann

[Stubby]

With engine running hold the emergency flasher button down for 30 seconds.

[Catalyst105]

I’ve followed the video and tried 4 times. In the video he has the engine off, and it works with the engine off (hyperflash stops), but hyperflash returns when the engine is running.

[BLUEKNIGHT911]

I installed an LED set up on my F3-S that allows the Led above the taillights to flash when I apply the brakes.
The only issues is that now my turn signals hyper flash.
Has anyone experienced this?
If yes, how did U get the signals back on normal flashing?
Rotax

" Hyperflashing " ..... Folks here spend multi hundreds of dollars for numerous types of lights - why - because they want to be seen / noticed etc. many say it's for Safety reasons ..... So I think Hyper-flashing is a good thing ..... In my State ( Vt. ) under the Mtc. inspection rules " Hyperflashing " isn't " a violation ...... imho be glad you have it ...... Mike

[Bill]

Worked for me too!