|
-
 18 April ...Remove OEM passenger foot peg F3-S
I was in the process of changing my F3-S oem passenger pegs to BRP footboards.
I ran into a snag with one of the 5mm allen bolts holding the peg.
One bolt came out with no issues, but the second turns but will not extract. All it does is turn and turn in place.
I am in the midst of a FUBAR situation.
Any suggestions as to removing the stubborn bolt?
Thanks,
Rotax
-
Very Active Member
Seems to be common issue. The right side pass peg on my 2019 F3-S won't stay folded up. The bolts are TIGHT. Since I ride solo, I just put a touch of black silicone in the pivot joint. That said, I'll have it addressed at some point while under warranty. Good luck in your endeavor.
2022 RT Sea To Sky
--------------------------------
-
Evening Troop:
After further FUBRARING is decided to let the dealer handle the upgrade.
Rotax
-
Very Active Member
One must heat them with a torch? Have you done so?
-
No
can I just drive out the brass sleeve and install new?
-
Active Member
 Originally Posted by Rotax
No
can I just drive out the brass sleeve and install new?
Lamonster has a very good video on removing those screws
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
to see my 2016 F3-T and many how to's
