I have this and it holds a good load as my wife has a very heavy water thermos. Just make sure it doesn't twist down or it will damage the paint.
I kept adjusting it till it was just right.
I have this and it holds a good load as my wife has a very heavy water thermos. Just make sure it doesn't twist down or it will damage the paint.
I kept adjusting it till it was just right.
The best cupholder would depend on the cup/mug/bottle you want to use. We use 20 or 24oz Bubba Hero Sport bottles, on sunny 95° days I've filled them up with water and 5 ice cubes and they will go gas stop to gas stop and still have ice. Usually run out of drink before the ice melts. Only thing is the bottles are large,and I had to make my own holders out of PVC pipe and webbing. To attach to the passenger grab handles I did as bluewoo posetd, but I put a RAM ball on the holder itself and used a medium arm to keep it away from the tupperware.
2018 Can Am Spyder RT Limited, 2013 Triumph Bonneville T100
Motorcycle Rights: AMA Charter Life Member, MRF, FORR Life Member Local 11 Southwest Missouri, Mid-South MILE organizing committee member
2018 RT Limited , Got one, on, then off then on until Gloria decides if she likes it or not. blue
Drink2go.com They work very well for the front and back.
Thank you,
Ray B.
These are the states I have driven my Spyder Rt Limited too.
Mudflap -- Walmart
Tricled Headlights and Fog lights -- valueaccessories.comRimsavers -- RimBladesUSA.com
Showchrome Tiregard (TPMS) -- motorcycleid.com
Front and side grilles -- CanAmSpyderAccessories
Passenger arm rest -- Diamond R Accessories
Rear axle caps -- Lamonster
Magic Mirrors -- Lamonster
Yellow and red running and blinker lights on fender --Show Chrome
TRUNK-MOUNTED, DOUBLE FLAG HOLDER -- Rivco
Rear Brake light for trunk -- Custom Dynamics
Bumpskid w/led lights -- Spyderpops
Seat cushion -- Airhawk
Cup holders -- Drink2Go
Ultragard-4-457BK-Black-Cover-Spyder -- Big Bike Parts
Our Spyder has Corbin Armrests for the passenger. They came with the Corbin cupholder. The Corbin cupholder did not work well.
Removed the Corbin cupholder and installed a Profile brand bicycle water bottle cage. This works very well for us. Typically placing a clear drinking water bottle in the holder. Even though loose, they have never been lost. The Corbin was bad about loosing entire water bottles.
I also use the Drink2Go for the passenger cup holder. Up front, I've got a LAmonster Spyder cuff with the cup holder on the back side. I already had an insulated cup that would fit, so I didn't purchase that.....every works great.....front and rear.
drink holder
Reply With Quote
Originally Posted by bluewoo
