|
-
 1/2 Cover
What is everyone using for a 1/2 covers?
Brands?
-
Ozzie Ozzie Ozzie
Brands of 1/2 cover used?? By me - BRP - negotiated/included in my original 'new purchase' deal! 
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
I have the new BRP half cover for the 2020 RTL.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
I was lucky, my GoldWing conversion 1/2 cover fit my 2020 RTL perfectly.
-
Very Active Member
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
What I don't like about covers is; If they are black in color, and you have the bike parked in the sun, its like an oven under them...My cover is an aftermarket 1/2 cover, light colored...larryd
-
Active Member
I found a nice one for a good price on Amazon. Comes with bag, hole for antenna and best of all a Spider on the front!
https://www.amazon.com/Can-Am-Spyder...3&sr=8-1-spell
-
Active Member
 Originally Posted by bikerbillone
I was lucky, my GoldWing conversion 1/2 cover fit my 2020 RTL perfectly.
Same here. Works perfectly.
-
Very Active Member
I use the BRP 1/2 cover on my 2014RTS-SE6.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Active Member
I have an OEM 1/2 cover for sale if your interested
Bob H - Derry, NH
2020 Spyder RT Limited - Petrol Metallic Blue
2010 RT622 Trailer and BRP Hitch
BRP Vented Touring Windshield, BRP Backrest
Garmin 590 with BRP Mount
Fobo TPMS for Spyder and Trailer
Lidlox, Blue Sea Fuse Box for power distribution
Ram Ball Mounts for Radar Detector, Cup Holder and Phone Holder
Sena 20S / SL2 Headsets, Foam Grip Covers, Belt Tensioner
BAJA Ron Sway Bar and Shock Adjusters, Heli Bars
-
Very Active Member
I have the Nelson Rigg half cover, that I used for my 2014 RT I really like it, except for one thing.
It doesn't fit the 2020 RT Limited.
I'll look for alternatives, otherwise I'll have to go with the BRP one.
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Very Active Member
Last edited by CopperSpyder; 04-04-2020 at 09:38 AM.
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Very Active Member
I just ordered an Ultra Gard 1/2 cover. I have a full cover, but I wanna try the half cover for a while. The full cover from UltraGard is a great fit and works very well
2021 RT Limited
-
I have the Ultra Gard 1/2 cover. It fits well w/both the stock windscreen and my new 7Jurock (same height, recurve, wider) windscreen. It has 4 rubber coated clips that hold it on. 2 clip under each floor board and 1 each in the back clip under/just to the outside of the rear fender. It's made it through some pretty good wind and never moved. Honestly, I think it would have stayed in place even without the clips.
-
Very Active Member
Nelson Riggs is what I use on the road.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
