Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    May 2019
    Location
    Mt. Juliet, TN
    Posts
    15
    Spyder Garage
    0

    Default Pass Footpeg -- how do I tighten them?

    2020 F3-T passenger footpeg is loose and will not stay in the raised/non-use position. I tried the hex head bolt but cannot budge it. Not sure what to do if I do get it loosened other than add another washer. Any suggestions?
    Last edited by Peter Aawen; 03-26-2020 at 12:30 PM. Reason: This is a "How do I?" question not a "How to do:" description

  2. #2
    Very Active Member Ex-Rocket's Avatar
    Join Date
    Mar 2013
    Location
    Marion, Arkansas
    Posts
    1,311
    Spyder Garage
    0

    Default

    I know on my 2017 F3 limited the passenger floor boards will also not stay upright out of the way. When the floorboard is raised it will rub the panel and if it would stay upright it would scratch the panel. So I just leave it in the down position.



    2017 F3 Limited in Intense Red Pearl

  3. #3
    SpyderLovers Sponsor
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    12,818
    Spyder Garage
    0

    Default

    Rocket is correct.

    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  4. #4
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,492
    Spyder Garage
    1

    Default

    On our 2016 I took the pegs off and lubricated the bolt and that fixed it.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650

  5. #5
    Active Member troop's Avatar
    Join Date
    Aug 2019
    Location
    Stoughton, WI
    Posts
    459
    Spyder Garage
    0

    Default

    My right one is the same way on my 2019 F3-S. I just put a dab of black silicone in the gap to hold it up. If I need service, I'll have it fixed under warranty.
    2019 F3-S SE6 Monolith Black
    --------------------------------
    Comfort: Madstad 14" dark gray - 20" light gray windshields/Seth Laam seat/Homemade floorboards-highway pegs/+4 and +5 linkage/Long Reach Bars/Heated grips/Big Bike rider backrest/Handguards

    Ride and Handling: Spyder**** sway bar/Vredestein Q5 front tires/Cooper CS5 Ultra rear tire/Two Up shock/Laser aligned

    Performance: DynoJet PV3/K&N air filter/Baldwin cat delete pipe/LaMonster belt roller

    Convenience: Shad detachable luggage/Spyder**** USB-12V powerport/Detachable passenger seat storage box/Bar end mirrors

    Safety: H4 LED headlights/Aux fender LED lights/TricLED driving lights/TricLED run-brake-turn rear light/Frunk lip LED light strip

  6. #6
    Member
    Join Date
    May 2019
    Location
    Mt. Juliet, TN
    Posts
    15
    Spyder Garage
    0

    Default

    Highwayman, Did you have difficulty getting the bolts loosened. How did you remove them is difficult?
    I can't loosen mine w/o more torque than I am comfortable....concerned I'll strip the hex fitting??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •