Results 1 to 18 of 18

Thread: Speed bleeders

  1. #1
    Active Member ris's Avatar
    Join Date
    Jun 2016
    Location
    N.H.
    Posts
    68
    Spyder Garage
    0

    Default Speed bleeders

    I have a 2015 RTSE6 .
    I'm looking for the part numbers for speedbleeers for the front and rear. I called the company and was told they don't have a specific part for the Spyder. That I needed to remove and measure the original bleed screws on my bike and they could match them. Bike is still in winter storage.
    Thank you in advance.

  2. #2
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,330
    Spyder Garage
    1

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  3. #3
    Very Active Member Lew L's Avatar
    Join Date
    Mar 2015
    Location
    forrest above Reno, Nv
    Posts
    3,621
    Spyder Garage
    1

    Default

    I just ordered them for my . They sent the wrong size [ SD8125L ] and are now in the process of sending me the 6mm size. The gal there was flummoxed about this, but was happy to fix it right away.
    Last edited by Lew L; 03-16-2020 at 12:30 PM.
    Kaos----- Gone but not forgotten.

    2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
    2014 RTS , Circuit Yellow

  4. #4
    Very Active Member Big Arm's Avatar
    Join Date
    Jul 2008
    Location
    Sioux City, Iowa and Tucson, AZ
    Posts
    2,136
    Spyder Garage
    0

    Default

    Mine are in the mail as we speak......hope their the right ones.....

    ....and we're gonna ride, we're gonna ride.....

    ride like the one-eyed Jack of Diamonds, with
    the devil close behind,.....we're gonna ride....

    2008 GS.....PE # 2888

  5. #5
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    My bike took SB6 125.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  6. #6
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,211
    Spyder Garage
    0

    Thumbs up

    OK. Just got off the phone with SpeedBleeders.
    They are exchanging my order of SB8 125L for SB6 125L.
    I hope the clutch bleeder is the same as the brake cylinder bleeders.

    Great customer service.
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  7. #7
    Very Active Member Big Arm's Avatar
    Join Date
    Jul 2008
    Location
    Sioux City, Iowa and Tucson, AZ
    Posts
    2,136
    Spyder Garage
    0

    Default

    So........what's the correct size for the ABS system on the GS and ST ?

    ....and we're gonna ride, we're gonna ride.....

    ride like the one-eyed Jack of Diamonds, with
    the devil close behind,.....we're gonna ride....

    2008 GS.....PE # 2888

  8. #8
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    I'm guessing it's 10 mm, cuz that's what SB sent to me.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  9. #9
    Active Member Garf's Avatar
    Join Date
    Oct 2017
    Location
    Ortonville, Michigan
    Posts
    70
    Spyder Garage
    0

    Default

    Quote Originally Posted by Lew L View Post
    I just ordered them for my . They sent the wrong size [ SD8125L ] and are now in the process of sending me the 6mm size. The gal there was flummoxed about this, but was happy to fix it right away.
    This company is fantastic. I too got the wrong size (M8) back in December. Went to install them today and realized they wouldn't fit.
    One phone call and the correct size (M6) are on the way. They are even including return postage for the wrong ones.
    Apparently BRP changed the bleeder size from 8mm to 6mm in 2013 and Speed Bleeder was not aware of it.
    They even went so far as to order a stock BRP bleeder screw and measure it to verify the correct size.
    Gary
    2017 RTL Asphalt Gray Metalic
    1987 BMW K75s

  10. #10
    Active Member
    Join Date
    Mar 2019
    Location
    NEBRASKA
    Posts
    433
    Spyder Garage
    1

    Default

    The speed bleeder folks are awesome
    2012 RTL 14 RTS , Pearl White @ Pearl White

  11. #11
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    I ordered from Speed Bleeder by phone months ago and the same thing happened. They sent a set of 6 mm right away at no charge. I told them to take note that the 8 mm ones are too large. They said they would. I guess the left hand doesn't know what the right hand is doing at SB.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  12. #12
    Very Active Member CopperSpyder's Avatar
    Join Date
    Nov 2018
    Location
    Waynesboro, PA
    Posts
    3,179
    Spyder Garage
    1

    Default

    Spyders 2008 - 2012 are SB8125L-M8- 1.25 - 32.54 and 2013 to 2019 are SB6100-M6- 1.0 - 28.80. According to the chart.
    My Spyder
    2012 RTL , Brown

  13. #13
    Active Member MrMagicFingers's Avatar
    Join Date
    Apr 2020
    Location
    Dartmouth, Nova Scotia, Canada
    Posts
    156
    Spyder Garage
    1

    Default

    You're gona love the speed bleeders. They make a somewhat easy job a brainless event.

    I change my brake fluid every spring and it just takes minutes now to do it. It's effortless.

    Tim
    Current - 2010 Spyder RTS

    1) Experience is something you don't get until after you need it.
    2) A closed mouth gathers no foot.
    3) IF YOU DON'T HAVE TIME TO DO IT RIGHT, WHEN WILL YOU HAVE TIME TO DO IT OVER??
    ___

    Horsepower is an illusory mathematical equation; Torque is REAL, and is the source of all good things in the world.

    The problem is not the problem. The problem is your attitude about the problem. Do you understand?

    Please check out my pics!!


  14. #14
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    And you don't have to yell...Honey come here and press the brake pedal for me, but only when I tell you.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  15. #15
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,767
    Spyder Garage
    1

    Default

    Just ordered a set. Their applications chart has the right numbers on it now, SB6100 for the calipers and SB1010 for the ABS.

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

  16. #16
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Quote Originally Posted by IdahoMtnSpyder View Post
    Just ordered a set. Their applications chart has the right numbers on it now, SB6100 for the calipers and SB1010 for the ABS.
    It sure took them a while to get it right.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  17. #17
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,767
    Spyder Garage
    1

    Default

    I should have said for 2013 on, except Ryker. They show SB8125 for Ryker and up to 2012.

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

  18. #18
    Very Active Member Revalden's Avatar
    Join Date
    Nov 2018
    Location
    Claremore, Ok.
    Posts
    683
    Spyder Garage
    1

    Default

    I ordered a set, but if I can find them I'll check which size I got. It was probably a year ago. I was going to replace the brake fluid soon during this lockdown.
    2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
    Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
    Passenger Arm Rests, Windshield Air Wing
    Baja Ron's Sway Bar & Spring Adjusters
    Air Scoops, LaMonster's Hiway Pegs
    Magnetic Mirror Mounts, Air Innovations Seat Cushion
    Red Chrome pin striping on Black hood
    Federal Formoza AZ01 front tires (they're GREAT)
    Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
    LED bars above radiator inlets
    LED brake/running/turn signals on license plate frame
    Tag-Along trailer
    LED headlights LED fog lights (WOW)
    2" x 2" Road Lights inside front fenders
    7' x 10' Cargo trailer
    Garmin 396 LM GPS
    RLS Cat-delete resonator with China Akropovic muffler
    New Banshee AGM
    M3 TPMS on front tires
    Remote Control for Heated Jacket and Heated Riding Pants
    Analog Clock and Analog Volt Meter
    Loose Nut Behind Handlebars
    2015 RT-S Special Series , Stock Spark Plugs Brake Pedal Extension Cherry Red/Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •