Results 1 to 18 of 18
  1. #1
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default Evoluzion air filter

    I have a 2008 GS with a Evoluzion air intake. Does anyone know where I can get a new filter element or a whole new air intake.

  2. #2
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,390
    Spyder Garage
    0

    Default

    Quote Originally Posted by swrafey2000 View Post
    I have a 2008 GS with a Evoluzion air intake. Does anyone know where I can get a new filter element or a whole new air intake.
    I'm not familiar with what your intake looks like ….. It is cleanable like the K&N type ???? ….. if not I would see about getting one ….. if you could provide some pics that would be big help …. On my 08 and 11 RSS I trimmed the rubber snorkel and added a piece of 4inch alumin. dryer hose to the end .… I then connected the hose to the right side air intake …. this provide much cooler Air to the Throttle bodies ….. Mike

  3. #3
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default

    I can't post pictures because the filter element is completely disintegrated. Evoluzion was the first one to come out with a filter that replaced the whole air box back in early 2008 but they went out of business in 210. I got this one used from Docdru in 2009. Does anyone make a replacement air intake for a GS.

  4. #4
    SpyderLovers Sponsor BajaRon's Avatar
    Join Date
    Aug 2007
    Location
    Greeneville, TN
    Posts
    13,590
    Spyder Garage
    0

    Default

    Evoluzion went out of business in 2011 (I think that was the year). In any case, it was long ago. Is this the drop in filter for the stock air box? Or is it a stand alone unit like the JT kit?
    Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)

    Only SLOW people have to leave on time...





  5. #5
    Very Active Member Gwolf's Avatar
    Join Date
    Apr 2019
    Location
    Florida Swamp
    Posts
    1,962
    Spyder Garage
    2

    Default

    Have you looked on ebay?
    2019 F3-S , Black & Silver

  6. #6
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default

    Yes, no luck. I've had my GS since it was new. I replaced the old air box with it back in April of 2008 so I would say I got my money out of it. Hard part is having to change it. I have a adjustable fuel pressure regulator on which is to tall for the stock air box.

  7. #7
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default

    It's a stand alone. Is JT' similar to the Kewlmetal one? The one Evoluzion one is oval foam filter that clamps over a billit aluminum duel velocity stacks.

  8. #8
    Active Member
    Join Date
    Mar 2018
    Location
    Pennsylvania
    Posts
    40
    Spyder Garage
    0

    Default

    Does it look like this? If so these are available on ebay.

    air filter.jpg

  9. #9
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default

    It's pretty close. It might work. Do possibly have a link please.

  10. #10
    Active Member
    Join Date
    Mar 2018
    Location
    Pennsylvania
    Posts
    40
    Spyder Garage
    0

    Default

    Do a search using the following words: K&N Style ( R-0990 ) AF0990

  11. #11
    Active Member
    Join Date
    Mar 2018
    Location
    Pennsylvania
    Posts
    40
    Spyder Garage
    0

    Default

    Here's what I did. I purchased the bottom half of an air box from ebay. (See picture) You can find these reasonably priced. Cut out the part with the tubes that mounts over the throttle bodies. I shortened the air box tubes and slipped the above air filter into them. The air box tubes are slightly larger, therefore the the air filter slips into them. The fit is snug, but clamps can be added.

    base.jpg

  12. #12
    Very Active Member
    Join Date
    Mar 2008
    Location
    Hesston, PA
    Posts
    1,039
    Spyder Garage
    0

    Default

    I "THINK" that there was a Buell or maybe it was Aprilia motorcycle that used a "souped up" version of the Rotex 998 engine...(around 140 HP) Maybe it used the same air filter that Evoluzion offered...I had their air filter, fuel pressure regulator & oxygen sensor eliminator on my 2008 GS but its long gone...larryd

  13. #13
    Active Member swrafey2000's Avatar
    Join Date
    Apr 2008
    Location
    Lakeland,Fl
    Posts
    324
    Spyder Garage
    0

    Default

    That's what is on mine.

  14. #14
    SpyderLovers Sponsor BajaRon's Avatar
    Join Date
    Aug 2007
    Location
    Greeneville, TN
    Posts
    13,590
    Spyder Garage
    0

    Default

    I am not familiar with the Evoluzion air intake system. But it is very possible it is simply a manifold designed to mate up to an off the shelf air filter. In which case, you should be able to find a replacement air filter for it. If that is what you are looking for.
    Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)

    Only SLOW people have to leave on time...





  15. #15
    Active Member
    Join Date
    Jul 2018
    Location
    Lake Stevens, WA
    Posts
    95
    Spyder Garage
    1

    Default

    or replace it with a JT - jt air filter for can am spyder
    2009 GS , MSD wires Red/Black

  16. #16
    SpyderLovers Sponsor BajaRon's Avatar
    Join Date
    Aug 2007
    Location
    Greeneville, TN
    Posts
    13,590
    Spyder Garage
    0

    Default

    Quote Originally Posted by CANUSASwede View Post
    or replace it with a JT - jt air filter for can am spyder
    I have to say that I really like my JT filter. Highly recommend the optional sound reduction component.
    Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)

    Only SLOW people have to leave on time...





  17. #17
    Very Active Member
    Join Date
    Mar 2008
    Location
    Hesston, PA
    Posts
    1,039
    Spyder Garage
    0

    Default

    Quote Originally Posted by swrafey2000 View Post
    I have a 2008 GS with a Evoluzion air intake. Does anyone know where I can get a new filter element or a whole new air intake.
    I just looked in my garage AND I have a BRAND NEW ONE IN THE FACTORY SEALED BAG from Evoluzion along with a NEW pressure regulator kit...(complete race air filter kit) I'll PM you my contact info...larryd

  18. #18
    Very Active Member oldgoat's Avatar
    Join Date
    Jul 2012
    Location
    DDO, Montreal Island
    Posts
    1,258
    Spyder Garage
    0

    Default

    WOW! Lucky OP
    2008 GS SM5, Full Moon Silver
    2007 Piaggio MP3 - 250cc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •