Results 1 to 3 of 3

Thread: Amp Install?

  1. #1
    Member
    Join Date
    Jun 2019
    Location
    OH
    Posts
    1
    Spyder Garage
    0

    Default Amp Install?

    Hello everyone, I love this site and the way it provides so much useful information. My Spyder is a 2011 RTL. I have searched and can't find the answer to my question. Any help will be appreciated.

    I want to install an amp, new speaker wires will be run from the amp to each speaker. I will tape the ends of the old speaker wires at the speakers and leave them in place. The high level speaker input will be used to input signal to the amp. Can I use T-Taps on the 8 speaker wires coming from the radio harness. I'm trying not to cut any wires in the harness. Will this work?

  2. #2
    Active Member
    Join Date
    Sep 2018
    Location
    Sneedville, TN
    Posts
    47
    Spyder Garage
    0

    Default

    I think I'd talk to a car stereo store and see what they say. The input requirement of the amp may or may not like the Spyder speaker output, but there's ways to make it work. I hope you'll post your results here, because I know others would be interested.

    Rick
    2018 Spyder RT Limited
    Asphalt Gray
    Can Am Passenger Armrests
    Can Am Comfort Seat
    Spyder Accessories Floating Footpegs
    Utopia Driver Backrest
    Bajaron Sway Bar
    Sena 20s Bluetooth
    Lidlocks Helmet Holders
    F4 Tall and Wide Tinted Windshield
    Fobo Tire Monitor
    Lamonster Spyderdock Cell Phone Holder
    Sheepskin Seat Cover
    Drink2Go Cup Holders
    Magic Mirror
    Can Am Trailer Hitch
    Missing Belt Guard

    Wish List - LED Headlights and Fog lights

  3. #3
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,393
    Spyder Garage
    0

    Default

    Quote Originally Posted by ogheez View Post
    Hello everyone, I love this site and the way it provides so much useful information. My Spyder is a 2011 RTL. I have searched and can't find the answer to my question. Any help will be appreciated.

    I want to install an amp, new speaker wires will be run from the amp to each speaker. I will tape the ends of the old speaker wires at the speakers and leave them in place. The high level speaker input will be used to input signal to the amp. Can I use T-Taps on the 8 speaker wires coming from the radio harness. I'm trying not to cut any wires in the harness. Will this work?
    … and …. … I'm a DIY'er and found this on my 2014 RT which has the same radio yours does. …. the main problem is the OEM speakers aren't very high quality, putting in a more powerful AMP isn't going to make the speakers BETTER.... A poor sounding speaker CAN'T be fixed with an AMP ….. I swapped out mine for JBL 2 Ohm models and my rears are now a full 5.25 size …. I don't play mine at full volume because it hurts my ears …. yep they are that good ….. so imho don't bother with the AMP ...unless you upgrade the speakers first ….And all four have to be changed, otherwise you will only notice the bad ones …… good luck …. Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •