-
Very Active Member
Originally Posted by will
I originally had the bars put on where they come closest to the rider, which I imagine that is what is called the short reach (which the dealer indicated that it was the A position handlebar). No problem with the cable length. My guess, could be wrong, is that BRP does not make different cable lengths for each handlebar as I had mine changed after the motorcycle came in to the Dealer.
After riding with my wife I have decided that I don't want them that close to my body so the dealer is going to change out the handlebars for me to the next size (which I think he called position B but I am not totally sure). Though I am waiting for the heated comfort seats to be installed to see if that makes a position difference.
Do you think you could post a few pictures of the short reach bars on your 2020 RTL? Plus ones with you sitting on your RT and your hands on the grips. Lots of pictures is not too many. Thanks.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Active Member
Yes, I will try tomorrow or if the wind dies down later today I will take the tarp off.
-
Active Member
Copperman,
I decided to go out and try some pictures, sorry none with me on it. I tried putting a tape measure on when I could get it to stay in the wind.
The first image is the distance from the center of the seat to the handlebar and the tape body adds 3 1/4"
IMG-1718.jpg
The second is an attempt to measure the handlebar length.
IMG-1719.jpg
The third is an overhead view with me standing on the passenger foot rest.
IMG-1720.jpg
The rest are also probably obvious.
IMG-1723.jpg
IMG-1724.jpg
IMG-1725.jpg
IMG-1726.jpg
Hope this helps, I probably should have removed the garbage can.
Let me know if you have any other questions. I am going to see the dealer on Monday to take some 360 degree photos of his place to put on Google for him.
-
Active Member
Here is a picture of the new Helibars installed on a 2020 RT.
Easy to install and will fit anyone. If you sell your bike put the old ones back one and sell them.
This one is set up about 1 1/2" closer and 3 1/2" taller then stock. The difference in comfort is dramatic.
HSTX08141-3.jpg
HSTX08141-4.jpg
HSTX08141-6.jpg
http://store.valueaccessories.net/He...rsF3andRT.aspx
-
Very Active Member
Thanks to all of you, now we know that there is enough wire length.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|