-
How can I identify aftermarket Stabiliser Bars?
A new owner here of a 2015 RT model. Been riding two wheelers for the past 60 years and having trouble adjusting to the trike characteristics, feels like it's tipping over on highly crowned road surfaces and made worse by a gusting crosswind. I've been reading here on this forum that there are several members that have changed out equalizer bars for a more stable ride and I intend to do the same this winter but first have a question.
How can I tell if my equalizer bar is original or has already been changed out? Paint color? Bar dimension? I purchased this low mileage Spyder from an estate so I cannot simply ask the former owner about modifications.
-
SpyderLovers Sponsor
The easiest way is to look at the end links. The OEM end links are plastic. Aftermarket end links come in various solid metal configurations. If you have plastic end links, you have an OEM bar. But a few have installed just end end links. So, if you have an aftermarket end link, you'll have to check further to be sure the bar was also changed out.
Ron (bajaron)
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
On Peggy's 2013 STS SM, the OEM anti-sway bar measures .532". It was replaced with a BajaRon anti-sway bar
which looked to be at least 50% thicker. The difference in body lean is wonderful.
Peggy and Howard
Hers: 2013 Spyder ST-S SM5
His: 1999 Honda VFR Interceptor
-
Very Active Member
-
Very Active Member
Hello RedRover,
A bit of body lean into the turn with the inside knee pressing against the " tank" and the outside foot pushing down on the peg or floor board REALLY make a difference. There is a learning curve unless you've have ridden ATV's alot.
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|