These push pins work for panels?

[acdcking12]

Bought these, but look a bit different

And can't get them to work

Will these work?

[JayBros]

Your photo appears to me to show only one piece. Spyder push pins have two pieces like the ones in the top row of this link:https://www.amazon.com/GOOACC-Retain...30689150&psc=1.

[VitoNam]

I use these and are as close as I've found to what BRP uses, and a LOT less expensive: https://www.ebay.com/itm/100-pcs-8-m...53.m1438.l2649

[acdcking12]

I ordered those on ebay. thank you

[VitoNam]

I ordered those on ebay. thank you

You are welcome! Those push pins are the best deal going, so it's easy/cheap to replace one you might have screwed up lifting those suckers out. With the proper tool even.

[Tec35]

You can also grab them on Amazon
100 PACK - Premium Venom Brand... https://www.amazon.com/dp/B07W627S5F...p_mob_ap_share

[VitoNam]

Thanks for the info. It's always good having more than one source to choose from. Premium VENOM. Gotta love that name!

[carbonation]

Push pin pliers can help remove them without damage, but it is really nice to have spares on hand.
https://www.harborfreight.com/push-p...EaArwBEALw_wcB

63700_I.jpg

[VitoNam]

Here's another handy push pin tool that works well. For the one I have, I modified the tool's head by grinding down the flanges, on either side of the opening, leading down to the shank just a bit. It reconfigured the overall shape of the head. For me, I found the tool works better that way getting under those pesky pins.

images-2.jpeg