-
Very Active Member
Originally Posted by PMK
Maybe some people read it one way and some of us another way. I read it word for word and understood what he wrote quite clearly. His focus is preoiling the engine prior to starting after a long storage period AND he wants to use the wide open throttle to allow the engine to crank without starting. He clearly stated wide open throttle and wanting to lube the engine. As for being curious, he is curious if others do this or not, not if it works or will not work.
Seems pretty basic wording and clear to me, guess I am reading exactly what he wrote and not overthinking it or running off on tangents. But, whatever, not losing any sleep over the replies or if he tries it.
100%
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Originally Posted by wilpir
What is this storage thing you speak of? Here in AZ no such thing..LOL
Seems Arizona storage based on what others post here is from May to October when it is too hot to ride?
-
Never too hot to ride! I ride to and from work everyday..Summer mornings are in high 70s to low 80s..only get hot around 4pm then cools down again..30-40 degree swings in temperature everyday is the norm...
-
Very Active Member
If in doubt, why not set the kill switch to the off position, then crank for maybe a total of 10 seconds? Then put it to the on position and start it. No guess work involved.
On the road again...........and forever young!
2013 RT-S SE 5
Yesterday is a cancelled check.
Tomorrow is a promissory note.
Today is cash.......spend it wisely.
-
Very Active Member
-
Very Active Member
Originally Posted by BoilerAnimal
If in doubt, why not set the kill switch to the off position, then crank for maybe a total of 10 seconds? Then put it to the on position and start it. No guess work involved.
Won't work! Engine won't crank with the switch in the kill position.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
You're right, I forgot that part. Can you tell I'm one of those that don't use the kill switch regularly?
On the road again...........and forever young!
2013 RT-S SE 5
Yesterday is a cancelled check.
Tomorrow is a promissory note.
Today is cash.......spend it wisely.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|