Results 1 to 7 of 7
  1. #1
    Active Member
    Join Date
    Sep 2019
    Location
    Cold Lake Alberta
    Posts
    89
    Spyder Garage
    0

    Default RT Trailer wiring harness

    Is the Spyder RTs trailer wire harness year specific? Does the harness fit all years? I have a 2015 RT special series and have a OEM hitch (coming) and will need the harness.

  2. #2
    Member allcd88's Avatar
    Join Date
    Jun 2018
    Location
    Crawford NE
    Posts
    22
    Spyder Garage
    0

    Default

    Here is the one I ordered:
    https://rover.ebay.com/rover/0/0/0?m...2F183520738273
    ....and a video I did for the installation:
    https://youtu.be/-5BK_hfWRmA

  3. #3
    Active Member
    Join Date
    Sep 2019
    Location
    Cold Lake Alberta
    Posts
    89
    Spyder Garage
    0

    Default

    Quote Originally Posted by splake0 View Post
    Is the Spyder RTs trailer wire harness year specific? Does the harness fit all years? I have a 2015 RT special series and have a OEM hitch (coming) and will need the harness.
    So nobody knows?

  4. #4
    Member allcd88's Avatar
    Join Date
    Jun 2018
    Location
    Crawford NE
    Posts
    22
    Spyder Garage
    0

    Default

    Did you click the eBay link I posted? The wiring harness says:
    “CONTROL MODULE Trailer Wiring Harness Can Am Spyder RT, ST LIMITED 2010-2017”

    They are the same up to 2017

  5. #5
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    The OE harness is the same for 2010 to 2017. Is different for 2018, 2019 and will not fit. The trailer harness is in 3 parts. The section that plugs into the Spyders harness is available as a separate part. So you can make any year fit.

    2018 F3 LIMITED

  6. #6
    Active Member
    Join Date
    Sep 2019
    Location
    Cold Lake Alberta
    Posts
    89
    Spyder Garage
    0

    Default

    Quote Originally Posted by allcd88 View Post
    Did you click the eBay link I posted? The wiring harness says:
    “CONTROL MODULE Trailer Wiring Harness Can Am Spyder RT, ST LIMITED 2010-2017”

    They are the same up to 2017
    I did not notice that but I think there should be another module? I want a OEM (BRP) harness with modules.

  7. #7
    Active Member Garf's Avatar
    Join Date
    Oct 2017
    Location
    Ortonville, Michigan
    Posts
    70
    Spyder Garage
    0

    Default

    I just had a similar situation and here is what I discovered.

    To get the OEM wiring you need 3 pieces because BRP doesn't sell it as a complete unit.
    #1 is what I call a Y connector (BRP calls it a module harness) part # 710005823
    this connects to the Spyder wiring harness and provides a take off for the trailer
    #2 is the actual taillight converter ( BRP calls this a module) part # 710003903
    this converts the 6 wire Spyder circuit to a 4 wire trailer circuit while also isolating the trailer from the Spyder
    #3 is the trailer harness itself ( BRP also calls this a trailer harness) part #710003272
    this attaches to the output of the Module and ends in a 4 pin SQUARE receptacle that you can plug your trailer into.
    If you have anything other than a 4 pin square trailer plug you will need to either use an adapter or rewire your trailer.

    Your Spyder is a 2015, mine is a 2017 so all part numbers are the same. Hope this helps. Good luck
    Gary
    2017 RTL Asphalt Gray Metalic
    1987 BMW K75s

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •