missing mirror clip

[Woodaddict]

well that's better than me. had 2 in my hand, wanted to show wife how strong they were. well, look honey, let them smash together, and they broke!!!!

[Deanna777]

I also have the Magic Mirrors, I have no regrets.

I installed the Magic Mirrors my self.

You can go to Gallery " My Albums" on page 1 for pictures.



Deanna

[BLUEKNIGHT911]

well that's better than me. had 2 in my hand, wanted to show wife how strong they were. well, look honey, let them smash together, and they broke!!!!

I did a lot of research on the Magnet ( for mirrors ) thing ….. Magnets are pretty fragile and are basically cast metal.... ( magnets aren't found - they are created …. Rare earth is a misnomer ) …. What I learned was if the magnets are epoxied inside a steel cup, they will still break, ( I know I hit one with a hammer and broke it " on purpose " as a test ) …. however the pieces won't go anywhere … and the broken pieces remain with the same polarity …. annnnnnnnnnnd they actually increase in strength.... Un-fortunately the ones that come in the cups have a center hole that is too small for the OEM bolt ….. I contacted a seller of magnets and had them make some with a 7mm hole ….. Mike

[wmh9680]

I found some the exact diameter and the hole was the right size but I broke all but one just handling the. I thought I could jb weld them back together but their polarity becomes independent with each one and the parts do not stay together yn the same pattern as the were before to make them hole again. I could have make my oun magic mirror kit but didn't. Gettin lazy and impatient in my old age I guess. Thanks, Mike

[davev1pa]

Did you piecemeal your magic mirrors together or buy a kit?

[wmh9680]

Did you piecemeal your magic mirrors together or buy a kit?

I bought LaMonsters kit

[irvin48]

cant get out and ride even if it was nice in Illinois. at least we can excercise and get out some.
everyone stay safe. so far our county has no positives as of yesterday.