Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Aug 2019
    Location
    pennsylvania
    Posts
    15
    Spyder Garage
    0

    Default How to remove left side panel

    I need to remove the left side panel that lies under the seat as my heated gear fuse is located there. Do I need to remove all the left side panels before I can get that particular one off or can I just remove that one? I did remove the screw under the seat but couldn't get it off. I'm wondering if removing the screws in the side hard bag will enable me to remove the cover. I just need to get to the heated gear fuse. Thanks in advance

  2. #2
    Active Member FlyBoy2121's Avatar
    Join Date
    Aug 2018
    Location
    Canada
    Posts
    166
    Spyder Garage
    1

    Default

    I gbdola

    Go to see on youtube this vidéo, if you have a RT Spyder


    https://www.youtube.com/watch?v=zVulKP4_GaU

    FlyBoy2121
    2014 RT ltd , original original Cognac

  3. #3
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,851
    Spyder Garage
    0

    Default

    I much prefer and recommend the mirror removal procedure shown at 11'35" of this video.
    https://www.youtube.com/watch?v=ZPeb...ature=youtu.be
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  4. #4
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,329
    Spyder Garage
    1

    Default

    To answer your question yes you do have to remove the screws from the piece around the bag. The screw at the top of the panel under the seat is much shorter then the others, so make sure it goes back in the same hole. I also prefer removing the mirror and the other panels 1st,but you can do it without. The middle panel , the one with the two fake screws showing, can be lifted up and the top panel screws underneath it removed. Just pop the fake screw loose from their rubber grommets. It's fiddley but it can be done that way. I have done it many times but have decided it is not any easier or faster.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  5. #5
    Member
    Join Date
    Aug 2019
    Location
    pennsylvania
    Posts
    15
    Spyder Garage
    0

    Default

    thanks

  6. #6
    Member
    Join Date
    Aug 2019
    Location
    pennsylvania
    Posts
    15
    Spyder Garage
    0

    Default removing panel form rt

    Quote Originally Posted by pegasus1300 View Post
    To answer your question yes you do have to remove the screws from the piece around the bag. The screw at the top of the panel under the seat is much shorter then the others, so make sure it goes back in the same hole. I also prefer removing the mirror and the other panels 1st,but you can do it without. The middle panel , the one with the two fake screws showing, can be lifted up and the top panel screws underneath it removed. Just pop the fake screw loose from their rubber grommets. It's fiddley but it can be done that way. I have done it many times but have decided it is not any easier or faster.

    Thanks for the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •