What did you do to your Spyder today?

[Saluda]

Checked the tender, wanted to make sure she was full.

[bigbadbrucie]

I now have my BajaRon Swaybar installed. I also have installed the HALO Skid plate. Now I need No Rain or Snow so that I can try them out....I just don’t know how long that will take.

[CloverHillCrawler]

Cleaned up after riding a loop through the valley between South and Catoctin mountains yesterday, after cleanup installed a battery tender quick connect on the battery.

[K80Shooter]

Cleaned up after riding a loop through the valley between South and Catoctin mountains yesterday, after cleanup installed a battery tender quick connect on the battery.

Did you use star washers? If so were they the internal or external and what size were they? All I have here local fit rather loose so I'm looking for the right size before ordering some.

[RICZ]

Did you use star washers? If so were they the internal or external and what size were they? All I have here local fit rather loose so I'm looking for the right size before ordering some.

Remove the negative terminal bolt for size and dig through you cigar box / Mason jar of fastener odds and ends. A split lock washer will work just as well. Or any hardware store or building supply will have them. No need to order two lock washers.

[K80Shooter]

Remove the negative terminal bolt for size and dig through you cigar box / Mason jar of fastener odds and ends. A split lock washer will work just as well. Or any hardware store or building supply will have them. No need to order two lock washers.

Thanks but the smallest I have is 1/4" and they are too big. I was wanting the star washers but could go with regular split lock washers.

I do know that a #10 is too small and a 1/4" is too big in the star washers, my stores have nothing in between. I'll head over to Home Depot to see what they have in split lock washers.

[Bunson]

The screws are a M6 that use a M10 wrench.

[CloverHillCrawler]

Did you use star washers? If so were they the internal or external and what size were they? All I have here local fit rather loose so I'm looking for the right size before ordering some.

No star washers used, just a lockwasher. I guess if I wanted to spend the time looking for one I could install them.

[K80Shooter]

No star washers used, just a lockwasher. I guess if I wanted to spend the time looking for one I could install them.

No problem. I've found out that they are 6mm so getting regular lock washers will not be a problem. Still have to order them as no one in my little town has them. We don't even have a hardware store. lol.

[FrogmanDave]

The screws are a M6 that use a M10 wrench.

M6=.240" so any 1/4" washer, lock washer or whatever will work just fine. 5/16" will give you a little more clearance.

[ES44AC]

20211213_174516.jpg

Installed my Zumo XT and the Spyder Extras 12v docking station.

[ndspyderlover]

I let it sleep. It is in storage. I'm from North Dakota. BRBRBRBR

[Bartender]

My new RLS Torpedo exhaust arrived yesterday. Installed it last night. Really like the look of it and the sound is great. I've got to say that the BRP engineers that installed the OEM muffler with a healthy dose of orange locktite should give that another thought. Real wrestling match to remove the rear mounting bolt on the OEM but other than that very straight forward install. I like it.

[bikerbillone]

BRP loves orange locktite, no doubt about that.

[Haze]

Just patted the Spyder on her seat as I passed by on my way to work.
Will ride as soon as the salt and brine is washed off the local streets and highways.
It raining/snowing today so there is hope for a ride this weekend.
Temp will be in the 40's.

[hut1]

I've never posted to this thread, but since I've had my '21 F3-S for exactly one year now I'll list the mods I've done to date:

LaMonster Ultimate Rider Backrest
Lamonster Ultimate Passenger Backrest
Double Vision Daytime Running Lights
LaMonster Position 4 Brake Rod
LaMonster Bright Ryder
IPS LED Fog Light Kit
H4 LED Headlights
WrapMySpyder:
Panther Bite frunk wrap
Carbon Fiber Spine Tank Protector w/5pc Gas Filler Kit w/Purple text
Carbon Fiber Full Knee Panel Cut-out w/Purple text
Carbon Fiber Access Panel/Mirror Panel Inserts
Ram 1" Tough Ball base w/2" Double Socket Arm
Ram Quick-Grip XL Phone Holder w/ball
IPS FMB Bottle Holder w/bag
IPS Frame Caps and Peg Combo, Trident Large
IPS Top Cuff and Mirror Combo
IPS Packrack
Kuryakyn Momentum Drifter Bag
F3/Spyder Logo Aluminum Driver Floorboards
LidLox Handlebar Helmet locks
TricLED Rear Fender LED Reflectors

More to come......

Forgot an important item......Chrome PPA wheels (thanks SL member TIMMB)

[bikerbillone]

Very nice, very nice indeed.

[CloverHillCrawler]

Salt on the Road and Snow on the way. Put the F3 on the Tender and started placing my orders to prep her for spring riding so my wife can join me.

OEM BRP Carbon Black floorboards confirmed to be shipped and out for delivery, just ordered the floorboard risers and a F3 Linex brake pedal from Pierre and have a quote request in to Ultimate for a Tallboy seat to see about availability per their website.

[Haze]

Here in Northern Nevada the ice and snow melted this past few days.
Temp in the 50's and roads are dry. Truly a change from last week's blizzards and road closures.
Installed DIY handle bar mirrors on the F3T and tested the install.
Today I was able to ride 82 miles just to keep in saddle shape.

[Jim2016]

Changed oil and checked all fluid levels. I give my Spyder a hug daily. Here in SC we can ride most days even in winter. Rode in annual Polar Ride last Saturday (temp 80 degrees).

[Lew L]

Here in Northern Nevada the ice and snow melted this past few days.
Temp in the 50's and roads are dry. Truly a change from last week's blizzards and road closures.
Installed DIY handle bar mirrors on the F3T and tested the install.
Today I was able to ride 82 miles just to keep in saddle shape.

Great Dave,

I'll just have to ski as the just cleared my street yesterday.

Lew L

[Yabbadabbadoo]

I'm in the process of adding wiring for heated clothing for driver and passenger. Also installing a front/rear dash cam system.

[Haze]

Working on refining the wiring for my heated gear with a 2 channel remote controller.
Changing the SAE connections to Coax connectors.
Assembling and installing an IPS back rack.
Adding an LED programmable brake light to the back rack.
Finally installed wiring for my XM radio.

[Bunson]

Looked longingly at her and told her I love her and that it won't be long.

[190243]

Did nothing it’s back home in dunsford lol. I’m in Dresden now will be headed for Myrtle beach next week. sitting here waiting for the young lad to call maybe get out on the sled before we go.