Today I installed the Spyclops and the Stainless Steel vents from Spyderpops. I had previously installed a led light on the lower front of the bike. No reason for someone to say I didn't see you now.
One before than some after pics. I really like the stainless steel vents better than just the hole
Replaced the factory battery on my 2015 F-3. It was still working fine, but I didn’t want it failing at a bad time. The battery clamp was a bit frustrating to get back into place.
Replaced the factory battery on my 2015 F-3. It was still working fine, but I didn’t want it failing at a bad time. The battery clamp was a bit frustrating to get back into place.
That battery lasted a decent time
2022 RT Sea To Sky
--------------------------------
That looks amazing! Can you post a night time picture with the new light?
Here's a couple from the front looking at the lights and one from beside the windshield looking forward. The lower looking lights are just reflections from the lights above. The headlights were off. Also you cant tell from the pics but the spyclops is brighter than the factory leds on each side of it.
Shooter, I see a LED up front just under frunk lid, under the BRP badge when the lid is closed. That is very neat, an you give me a link where ya got it.
Shooter, I see a LED up front just under frunk lid, under the BRP badge when the lid is closed. That is very neat, an you give me a link where ya got it.
Installed Bumper 2.0. Bumper 1.0 was made of aluminum channel and closer to the bodywork. I feared that, in an impact, it would collapse. Bumper 2.0 is made of steel square stock and farther from the body. Mo bettah! Bottom photo is Bumper 1.0.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Took a ride into town. Filled the tank with gas. Stopped an picked up dinner for tonight. Was a nice ride an spent some time with the people who own the restaurant. Just finished dinner, it was so good.
Nice install K80. Was thinking about installing one on Belle, but holding off for a while in hopes that one of our vendors will come up with a "Night Rider" light to install in that location. Having those sequential LED's would look awesome there and hooking up to the GPS circuit shouldn't cause a hyperflash on our Spyders.
Installed sling mods fog lights. My first adventure removing tupperware, wasn't too bad. Was a bit disappointed to find out the DRL piece of these lights don't work with headlights on high beam, but oh well. I still have a second set of "eyes" trying to make eye contact with those sometimes villainous vehicles I must share my roads with.
Nice install K80. Was thinking about installing one on Belle, but holding off for a while in hopes that one of our vendors will come up with a "Night Rider" light to install in that location. Having those sequential LED's would look awesome there and hooking up to the GPS circuit shouldn't cause a hyperflash on our Spyders.
If they do come out with a "Night Rider" light to go there I would just have to get it also. No hyperflash at all.
E5EE69FE-F2B1-43D2-865A-53F0B284C4B5.jpg91B7807E-4DFE-4088-B338-1CFEF98D9378.jpgI bought a J&E Tear drop Trailer (2009) last week. Had about 100 miles on it and pulls incredible. I’ll have to replace tires which are also 2009 but look new. Obviously, not for the road. Been working on cleaning it up. Wire brushed as much surface rust, which is all there is, off the metal underneath and painted with spray on undercoating. Then removed wheels, cleanedup and painted hubcaps, am replacing hub covers and lug bolts which had rust on them. Cover had holes in them so needed replacing and lug nuts were less expensive than the pain to paint them. Would have had to buy a whole can for them. Cleaned the hubs off and sprayed with undercoat. CLeaned pull tongue and hitch and painted. Painted hitch with aluminum paint like wheels and painted tongue with a plastic coating. Looks real nice.
My rendition of a fenderless, side mount F3S. Underneath lights and TricLED brake light. I know about rain issues. That said, when I go on my trips, I have my Lamonster Packrack/top case installed. Only (4) bolts to attach the rear fender.
2022 RT Sea To Sky
--------------------------------
I didn't do anything to my spyder, it is still hibernation
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
I didn't do anything to my spyder, it is still hibernation
Deanna
I fear it’s going to be that way for a WHILE. Old man or women winter has really set in this year. Not a lot of snow but cold temps. Even though the roads are clear at times nothing will clean that brine off till April now. They have really laid it thick this year.
“Born to Ride......Ride to Live....MOATER ON !
“Current ride: 2017 RT Limited”
If they do come out with a "Night Rider" light to go there I would just have to get it also. No hyperflash at all.
Oh Boy,
Been in touch with TricLEd and they are getting ready to announce a "Knight Rider" chaser LED for the front end of our RT's. Will not cause hyperflash. I've been waiting for this for a long time. Time to break into my piggy bank again.
I fear it’s going to be that way for a WHILE. Old man or women winter has really set in this year. Not a lot of snow but cold temps. Even though the roads are clear at times nothing will clean that brine off till April now. They have really laid it thick this year.
Yes OLD man or woman winter has arrived here. This past weekend the temps were dangerously cold( windchill temps). ( off topic I am looking forward to spring, getting back on the bike).
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Reply With Quote
Originally Posted by CA Railwhale
!
Time to break into my piggy bank again.
