I got my 2014 RT-S out of the storage trailer and installed the Lamonster Magic Mirrors. Also charging the battery.
Next up is LED headlights and fog lights from Lamonster, but not today.
While I'm doing the lights, I'll also change the oil, bleed the brakes and maybe change the coolant.
That's all from the blue ribbon.
That's all folks !
2014 RT-S , This will be the first thing I do for it. Yellow
Moth balls are a great deterrent. Just place some on the floor under the bike. Rodents love having today's wire insulation for lunch.
I showed off our F3L to a Victory Cross Country rider (I used to have a Cross Roads) and he's thinking of getting one for his wife.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Did a little windshield etching with an image of a set of Mystery patches which are hard to get along with Star Wars text “2018 Can Am Spyder” & “My SpyWing Ride”
2016 RT-Ltd
Bajaron swaybar
Spyderpops trunk light
Elka stage 2 front shocks
Extra longbrake pedal
brake modulator
Centramatic wheel balancers on the front and rear.
Rivco dual flag holder
Tricled mirror turn signal indicators
with American and Texas flags
Lamonster Magic Mirrors
missing belt guard
Lambskin seat cover from Smokey mountain sheepskin.com
Tricled 360 degree led Headlights
Lamonster led fog lights
Baker air wings
2019 Silverado Duramax dually
2019 Cyclone 4007 toyhauler
Spyderpops bumpskid w led light
Rivco brand footrest
spydermanexhaust.com exhaust
had my exhaust installed @ Spyder in the hills.
I made a flag mount that its the Custom Chrome rack. That's for a US flag. I have a Thin Blue Line flag on the antenna. Oops, wrong photo.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
I also ordered the Speed Bleeders for all 4 ports.
2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
Passenger Arm Rests, Windshield Air Wing
Baja Ron's Sway Bar & Spring Adjusters
Air Scoops, LaMonster's Hiway Pegs
Magnetic Mirror Mounts, Air Innovations Seat Cushion
Red Chrome pin striping on Black hood
Federal Formoza AZ01 front tires (they're GREAT)
Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
LED bars above radiator inlets
LED brake/running/turn signals on license plate frame
Tag-Along trailer
LED headlights LED fog lights (WOW)
2" x 2" Road Lights inside front fenders
7' x 10' Cargo trailer
Garmin 396 LM GPS
RLS Cat-delete resonator with China Akropovic muffler
New Banshee AGM
M3 TPMS on front tires
Remote Control for Heated Jacket and Heated Riding Pants
Analog Clock and Analog Volt Meter
Loose Nut Behind Handlebars
I did the BRP Xenon Headlight COnversion and the RIVCO Handle Bar Riser Kit on my 2012 Spyder RS-S, and I was able to get the trike blown apart after skinning, and get it back together. You have to stretch the cable out, and the headlight job demanded a frunk removal and console removal too. Its really not that bad. The instructions they sent are spot on, the even explain the harnesses, and I learned a TON about my trike today.
The new Handle bars are so much better. I left the bars wider with the kit, you can trim it to length, but I wanted to bring the bar back and have a longer bar, mission accomplished, I can ride it with my bum shoulder all day now, and now leaning on the bar anymore.
I rode my 2018 RTL today for the first time this year!! Our temps in the Omaha area reached 74 degrees - however very, very windy??? but it felt good to get out and feel the air...
BIG F