Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Last edited by Peter Aawen; 09-05-2022 at 06:46 AM.
Reason: Fixed link to MotoDog's website; fixed attach display ;-)
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020
Flushed the brake fluid out of the system, with new Dot 4. Also the vent line I had routed from the gas tank to the back of the frame, was leaving a oily like film on the cover that's above the back wheel and seeping down the rear shock, I had to add enough hose to route it all the way down to the bottom of the rear shock mount. Now the Damn thing can just leak on the ground. I have no idea why that stuff is coming out of the fuel tank vent line. I do not top off the tank. Followed the instructions to a T, posted by those in the know about this.
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Finally finished my Anniversary Edition Trunk project, as mentioned earlier, I had to get rid of the Chrome accent BRP logo on the trunk lid, and Thanks to BOBL I think i have a one of a kind rear emblem mount and look. And I wanted to add the High Mount Taillight / Brake light /Turn signals and seems they only come in ..... chrome So with some help from the ScratchesHappen folks, I now have this trunk lid Trunk Emblem and HMT Taillight.jpg
Oh and WrapMySpyder folks helped me with some new nose art New Nose Art (Medium).jpg
Tomorrow WE RIDE!
Last edited by DGoebel; 09-10-2022 at 11:47 PM.
Reason: Credit to BobL
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020
Also got a new phone that used a "c" type charging cable. So, I had to run a new charging cable from the trunk 12v source to the front of the . Sena SMH5 Bluetooths to to phone, Garmin 660, and passenger. All seems to work just fine.
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
Bolted a bunch of Lamonster Garage stuff on my trike. Floor board risers and highway pegs. Even at 6 ft I like my feet nice and high, I believe that comes from all the years of riding moto X and crotch rockets, I even modded my Harley Road Glide so the floorboards rode 3.5 inches higher than what the factory gave you.
Tomorrow, I'll bolt on the handlebar riser, but I now know I screwed the pooch by not ordering the GPS mount, so now I'll have to spend extra $$$$$
Last edited by Peter Aawen; 09-15-2022 at 05:45 PM.
Reason: Caps
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Just finished the install, well worth it. Had a question and Marcus is great to deal with. Plus there is a great discount on price if a member of this forum.
Installed Spyderpops "braker bars" but a bit differently. I installed them both on side of top case, basically horizontal. Tomorrow I install RGB engine lights and battery tender SAE connection. Thanks to Spyderpops and their great customer service! One LED for braker bars apparently had a short and they promptly shipped a replacement. Then when I unpacked rest of box with engine light I found the battery harness pack was missing. Another phone call and it should arrive in mail tomorrow (which is why I didn't install today)
Took the back wheel off and had the new Kumho Ecsta AST installed, then put it back on, got every thing buttoned back up and got a EBC, ABS error. Was like WTF, turned out that when I increased the gap between the brake pads by pushing in the piston a bit, the system did not like, even though I pressed on the brakes. Put it in reverse and started to back up and the pads made some weird sounds, then bingo no more sound or error codes. So I drove it around the paved area out side the garage and got up to 10 to 15 mph then stopped fast enough to almost leave the seat and no problem, took the wife for a 15 mph run around town and all was well no codes. So guessing the pads need to be firmly seated and in align, not cocked at an angle.
Spent almost $200 getting a replacement (2nd) key!
1. Purchased a blank key for $60.
2. Went to get key cut.
3. Got directions jumbled and went to less than competent locksmith. $5
4. Realized there was no point in programming a key that would not work. Too pissed to do anything but go home.
5. Got another blank key and went to competent locksmith. Closed for the day. $60
6. Went to competent locksmith next day.
7. Got key cut. Yay! $5
8. Returned to shop for programming. $40
9. Hot fudge sundae to celebrate. $12.50
~Sandee~
2016 RT-L (Purchased used in February 2018)
RT Dash Mount (from JT's Spyder Store)
Kuryakin Trident Highway Pegs
Hopnel Pouch
Magic Mirrors
Spyderpops Foam Handgrips
Iron Butt #35273
Girls on Spyders #2779
Reply With Quote
Originally Posted by DGoebel
So with some help from the ScratchesHappen folks, I now have this trunk lid
Power cable
. Sena SMH5 Bluetooths to to phone, Garmin 660, and passenger. All seems to work just fine.
M.2's Arrived
Plus there is a great discount on price if a member of this forum. 
