What did you do to your Spyder today?

[ollicat]

I am so sorry

[Quickdraw]

I installed the new Pedal Box Pro from lamonstergarage but it got too late for me to try it out. Hopefully Friday since tomorrow is supposed to rain. I'm curious to see how much of a difference it makes.

[Vincef329]

Phone fast charger and volt meter working good. The blue display is hard to read in the sunlight but it's readable at a stop if needed.
20230516_150451.jpg

[K80Shooter]

Ordered a NoCo NLP 20 battery as mine has bitten the dust.

[Jesster72]

Heading to my dealer tomorrow (5-19) for the brake switch recall, oil change and check up for the PA and SD trips this year. 80 degrees and sunny today at work - forecast tomorrow for the 85 mile ride to the shop -- 70 degrees and rain all day. If you're going to ride, sooner or later you're going to get wet.

[Lew L]

Removed foam grip covers I installed at the end of the last ryding season. Caused cramped hands. Made the grips to big I guess, stock grips are good now.

[Haze]

Picked my Spyder up from the dealer.
Pulley recall completed.
Finished fabricating my Handlebar mirrors.
Installed the GPS and XM radio.
I'm ready to ryde...

[Lew L]

.

Well then we should. I just did an oil and filter service on my , I'm ready to rock .

[DarkHelmet]

ordered a few mods which will make me and it happy, lol

[GS1]

I finished installing my lit painted panels

20230518_212403.jpg

20230518_212553.jpg

20230518_212910.jpg

[RodO]

Put on a Quad Lock for an iPhone using a 1" Ball Head + Double Socket Arm + 1” Ball Adaptor Mount + Motorcycle Vibration Dampener.

It's bolted on the lower left of the OEM Garmin mount, so I've got the option of using either for navigation.

Have used Garmin's and a SPOT tracker for many years but my preferred nav app might become Detecht.

[Haze]

Installed a LaMonster rear rack.
Battled with the installation of a Cat Delete w/baffle.
The three springs are a bugger. but yielded to my unrelenting determination to complete the job.

Hey Lew and Crew, Once again I'm ready to Roll...

[Wahrsuul]

Installed the new M2 shocks

Did a coolant change while I had the front off.

[ES44AC]

Put New EBC brake pads on front and rear.

[mark4Jesus]

I installed the new Pedal Box Pro from lamonstergarage but it got too late for me to try it out. Hopefully Friday since tomorrow is supposed to rain. I'm curious to see how much of a difference it makes.

I installed mine 2 weeks ago. When you put it in Sport +, hang on, it will throw you back!

[Haze]

Installed a Keyless Gas Cap.
Fabricated a cane holder for the rear rack.
Mounted a new License plate frame.

[Yabbadabbadoo]

Spring refresh. In the last week, I've tightened the front shock springs a bit, replaced the rear tire with another Vredestein Quatrac, and while I had it apart installed new brake pads, serviced the front sprocket. Also did an oil change.

[mark4Jesus]

Spyder Volt Meter.jpg

Joined the Voltage Gauge Brotherhood today! Not sure how I got the picture 90 degrees out. The gauge is level!

[bigbadbrucie]

Spyder Volt Meter.jpg

Joined the Voltage Gauge Brotherhood today!

I believe there are quite a few members of this club. I joined approximately 2 years ago.

[Peter Aawen]

Spyder Volt Meter.jpg

Joined the Voltage Gauge Brotherhood today! Not sure how I got the picture 90 degrees out. The gauge is level!

It's like that most likely because you took the pic on your phone or camera with it in Portrait Mode, so the image has its Upper Right Corner designated as the Anchor Point in its EXIF data. only the Forum uses the default Upper LEFT Corner as its default Anchor Point, so when you loaded your image onto the Forum, it flipped it 90° CCW to put the designated Anchor Point where the Forum expects & requires all Anchor Points to be!

We can't change the Forum default without a lot of effort & significant expense, but you could edit your image to change the Anchor Point; or an even easier solution is to simply flip your camera or Phone 90° CCW to put it into Landscape Mode whenever you're taking pics to upload here, (ie, drop the top of the phone/camera LEFT ) then once uploaded, all your images will always appear the right way up!

Cheers

[alexf415]

Got the Megatech License last night and disabled the DESS today. wow that was super easy. Installed the USB charger with voltmeter. Tomorrow I will continue installing the remaining LEDs and tank protector. Oh did I mention I ordered the NOCO jumper today???

[ollicat]

Dropped my Spyder at the dealer for 5 warranty issues and squeaky front brakes. I hope that they can complete all the work before the end of the summer.

[javajaws]

New phone holder and drink holder for the Queen's throne:

drink1.jpg

phone2.jpg

[javajaws]

Oh, and the Queen's new fur coat came in:

IMG_2451.jpg

[mark4Jesus]

Oh, and the Queen's new fur coat came in:

IMG_2451.jpg

I see that you treat HRH quite well! I have a '13 RTL and I only know of a drink holder that mounts to the handles. Those are nice!