-
Color code of brake light wires....
I have a 2016 F3T that I have the connector undone on one side at the rear near the taillights. I'm trying to tap into the ground and the brake light wire. I tried a test light at the connecter but seems it did not make contact with connectors. What is the color of ground and the color of the brake light wire?
Buckskin
-
Active Member
Hi,
Not sure for the F3T but on my RTS the brake is black (for ground) and Orange (for brake light wire).
I would presume that the cabling is the same on all Spyder (but I may be wrong).
Ride safe!
-
Very Active Member
The brake light wire is white. The grounds, there are 2 of them, are black.
2018 F3 LIMITED
-
Very Active Member
Signal right is brown/yellow to yellow on the connector.
signal left is gray/pink to yellow on the connector
tail is orange on both sides of the connector
brake is white on both sides of the connector.
black is ground on both sides of the connector
pic from my installation of super bright surface mount T3 leds.
Details ON MY PAGE >click here<
5-pin-right.jpg
-
Been away for a few days, but appreciate the color code info guys.
Buckskin
-
Originally Posted by Rattlebars
Signal right is brown/yellow to yellow on the connector.
signal left is gray/pink to yellow on the connector
tail is orange on both sides of the connector
brake is white on both sides of the connector.
black is ground on both sides of the connector
pic from my installation of super bright surface mount T3 leds.
Details ON MY PAGE >click here<
5-pin-right.jpg
Rattlebars,
Is the white wire the brake light wire on all spyder models? I am trying to connect my led lights with the brake light fixture and wanted to be sure as to which wire I needed to tap into.
Thanks.
-
Very Active Member
While on the subject of wire colors, I'm wanting to add a LED second back-up light without having to remove the top trunk, if possible. Anyone know the color of the wires going to the reverse light and can they be seen under the passenger seat? i suspect there are only 2 and one is a ground (black?). 2017 F3L.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
Originally Posted by RICZ
While on the subject of wire colors, I'm wanting to add a LED second back-up light without having to remove the top trunk, if possible. Anyone know the color of the wires going to the reverse light and can they be seen under the passenger seat? i suspect there are only 2 and one is a ground (black?). 2017 F3L.
Back up wire is PK/BG
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
Originally Posted by IGETAROUND
Back up wire is PK/BG
Thanks....is that PINK and what is BG?
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
Originally Posted by RICZ
Thanks....is that PINK and what is BG?
Main wire color is pink/ beige stripe
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
Originally Posted by IGETAROUND
Main wire color is pink/ beige stripe
I was thinking it might be beige, but wasn't sure. Thanks for helping - you're ending the year helping a fellow Spyder rider.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|