Results 1 to 7 of 7
  1. #1
    Active Member
    Join Date
    Jul 2019
    Location
    AL
    Posts
    179
    Spyder Garage
    0

    Default help in finding a part

    getting ready to take the trunk off my 2017 f3 limited,and i see there is supposed to be a cover that goes on in its place,can you tell me what it is called so i can look it up..... Thanks Lee

  2. #2
    Active Member
    Join Date
    Jul 2019
    Location
    AL
    Posts
    179
    Spyder Garage
    0

    Default

    i searched the forums and think i found the part #

  3. #3
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default You think... 🤔

    From the parts list at cheapcycleparts.com it shows a tail faring package for the T at $169.99 that looks to replace the trunk for the LTD. Could that be it...??
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  4. #4
    Active Member
    Join Date
    Jul 2019
    Location
    AL
    Posts
    179
    Spyder Garage
    0

    Default

    that's it,thanks

  5. #5
    Very Active Member Gwolf's Avatar
    Join Date
    Apr 2019
    Location
    Florida Swamp
    Posts
    1,957
    Spyder Garage
    2

    Default

    The storage compartment in the tail fairing is very small and almost useless except for a few small items. You can get a small tool kit and maybe a small first aid kit in there. That is about all.
    2019 F3-S , Black & Silver

  6. #6
    Active Member AVBIZ's Avatar
    Join Date
    Oct 2019
    Location
    Roswell, GA
    Posts
    296
    Spyder Garage
    0

    Default

    Curious how long it took you to swap to the tail cover. That’s a big selling point for the 2020; if just an easy swap then the 2019 looks appealing as an option.

  7. #7
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    There are 2 brackets that have to be removed to put the cover on in place of the top box. When you open the box, remove the rubber mat, remove the 2 screws. What those screws go into is what needs to be removed. You need 2 pushpins, too. Takes 10 minutes, one Torx 30 screwdriver. The metal fasteners at the rear of the cover might need to be installed.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •