Results 1 to 4 of 4
  1. #1
    Active Member
    Join Date
    Jan 2019
    Location
    Washington state
    Posts
    48
    Spyder Garage
    1

    Default Canister-ectomy --whats the hose diameter?

    Greetings from Washougal, WA!

    I'm gearing up to pull the tupperware for an oil change and also tackle a couple of mods while i'm in there. For the canister-ectomy, I'm working from the instructions found here.

    Does anyone who has performed this recall the diameter info for coupler and additional length of hose I'll need to extend hose #24?
    Canister-Ectomy.jpg
    I want to make sure I pick up the proper supplies and it would be nice to have the right stuff on hand before I begin.

    Thanks in advance!
    David

    --
    David Busey
    2010 Can-Am Spyder RT SM5

    "The Ride is the reason. The destination is just the excuse."
    2019 RTL , Phoenix Orange Metalic

  2. #2
    Active Member
    Join Date
    May 2019
    Location
    Carlton
    Posts
    53
    Spyder Garage
    0

    Default

    I just removed the hose that goes from the canister and down through the bottom om the spyder and didn't have to buy any additional hose. I just bought 2 clear fuel filters and used one to join the tank vent and hose together, and another filter at the open end of the hose. The drain hose I removed is long enough for you to feed it down the side of the airbox and vent it next to headlight above right front wheel. Best thing I ever did removing the canister... doesn't smell like a gas station now!

  3. #3
    Very Active Member CopperSpyder's Avatar
    Join Date
    Nov 2018
    Location
    Waynesboro, PA
    Posts
    3,179
    Spyder Garage
    1

    Default

    Quote Originally Posted by Upcoaster View Post
    Greetings from Washougal, WA!

    I'm gearing up to pull the tupperware for an oil change and also tackle a couple of mods while i'm in there. For the canister-ectomy, I'm working from the instructions found here.

    Does anyone who has performed this recall the diameter info for coupler and additional length of hose I'll need to extend hose #24?
    Canister-Ectomy.jpg
    I want to make sure I pick up the proper supplies and it would be nice to have the right stuff on hand before I begin.

    Thanks in advance!
    David

    --
    David Busey
    2010 Can-Am Spyder RT SM5

    "The Ride is the reason. The destination is just the excuse."
    For the 2010 RT SM5 your part# is 26 (same as 24 in diagram) and it is a 6.4 mm (1/4) hose.
    My Spyder
    2012 RTL , Brown

  4. #4
    Active Member
    Join Date
    Jan 2019
    Location
    Washington state
    Posts
    48
    Spyder Garage
    1

    Default

    Quote Originally Posted by CopperSpyder View Post
    For the 2010 RT SM5 your part# is 26 (same as 24 in diagram) and it is a 6.4 mm (1/4) hose.

    Spectacular. Thank you!
    David
    --
    David in Wa.
    2019 Can-Am Spyder RTL SE6

    "The Ride is the reason. The destination is just the excuse."
    2019 RTL , Phoenix Orange Metalic

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •