Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Sep 2019
    Location
    LI, NY
    Posts
    2
    Spyder Garage
    0

    Default Baja Ron sway bar install 2019 F3S

    Hey all,

    Sorry if this ain't the right place.

    Curious if anyone has experience installing the Baja Ron wway bar on a 2019 F3S. Instructions contradict themselves regarding long bolt location, and don't even mention spacers included in the box..

    Much appreciated.

  2. #2
    Very Active Member bluewoo's Avatar
    Join Date
    Sep 2018
    Location
    greensburg,pa
    Posts
    538
    Spyder Garage
    1

    Default

    https://www.spyderlovers.com/forums/...s-on-a-16-F3-T

    Maybe this will help?
    Post #11 ??
    2021 RT LTD Petrol Blue DARK delivered 9/22/20
    New Engine @ 500 miles 4/8/21 - 5/21 due to oil leak in block
    https://www.spyderlovers.com/forums/...400-miles-HELP
    2018 RT-L , Blue

  3. #3
    Very Active Member bluewoo's Avatar
    Join Date
    Sep 2018
    Location
    greensburg,pa
    Posts
    538
    Spyder Garage
    1

    Default

    http://lamonster.com/pdf/swaybarF32015.pdf

    Dont know where ya got it from but here is a pdf from lamonster.
    2021 RT LTD Petrol Blue DARK delivered 9/22/20
    New Engine @ 500 miles 4/8/21 - 5/21 due to oil leak in block
    https://www.spyderlovers.com/forums/...400-miles-HELP
    2018 RT-L , Blue

  4. #4
    Member
    Join Date
    Sep 2019
    Location
    LI, NY
    Posts
    2
    Spyder Garage
    0

    Default

    I actually got it from Spyderpops, with a v2.3 instruction packet. Step 3 seems to contradict itself, and nothing mentions these bushings.

    15715092064988845595169535918049.jpg
    Attached Images Attached Images

  5. #5
    SpyderLovers Sponsor BajaRon's Avatar
    Join Date
    Aug 2007
    Location
    Greeneville, TN
    Posts
    13,519
    Spyder Garage
    0

    Default

    Quote Originally Posted by mcap View Post
    I actually got it from Spyderpops, with a v2.3 instruction packet. Step 3 seems to contradict itself, and nothing mentions these bushings.

    15715092064988845595169535918049.jpg
    Anytime you have an issue with any BajaRon product, question, whatever. You can always call or email me (info listed with all instructions).

    The current version for the F3 is v3.0. If you don't have that version then you do not have the current set.

    I have updated all of my vendors with current instructions. But that doesn't mean they are necessarily sending them out. Sometimes they build kits and put them on the shelf and they may sit there for awhile. Especially if they put new builds on top of the older builds. You're still getting the same product, just not necessarily the updated instructions.

    If you send me your email address. I will send you a PDF copy of the latest version for your Spyder.
    Last edited by BajaRon; 10-19-2019 at 03:08 PM.
    Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)

    Only SLOW people have to leave on time...





  6. #6
    Active Member
    Join Date
    Apr 2019
    Location
    Ohio
    Posts
    182
    Spyder Garage
    0

    Default

    I had a similar question with my instructions. I contacted BaJaRon and within minutes he had the updated instructions emailed to me.

    On a side note the sway bar seemed to be a very nice improvement. My wife was always holding on to the rear hand rails because of the bikes rocking motion. On our first ride, after the sway bar installation, she did not feel the need to hold on due to the ride being more steady. I also notice an overall improvement in both the curves and with reduced rocking. I’m happy with the install.
    Poasttown

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •