I have my Elka Stage 2 shock set up to a feel that works for me. Preload of springs set to 9 3/8 inch on the extra heavy 10 inch springs.

I measure the ride height at 18 1/4. (measuring from top to bottom shock mounting bolt)


Is this too high??? do I need a shorter spring??? If a lower the preload, its too "loose" when turning!


Here in the Fox shocks install instructions that show ride height of 17 1/2

Fox info::::::
Verification conditions:
- Vehicle on a level surface
- Normal cargo load
- Rider and passenger taking place on the vehicle.
Measure the distance between the upper and lower shock absorber mounting bolts.
Recommended Preload
445  mm (17-1/2 in)
(rider+passenger+cargo)