Results 1 to 7 of 7
  1. #1
    Member robval1987's Avatar
    Join Date
    Aug 2019
    Location
    Lawton, Oklahoma
    Posts
    14
    Spyder Garage
    0

    Question New Ryker Rally's

    Unfortunately I don't have a Spyer, but I did get a New 2019 Can Am Ryker yesterday. I did look at the Spyder as I no longer was able to get on my Goldwing Trike due to health issues. I thought my days riding where over, sold all my bikes (FJR1300, VFR1200 and Goldwing Trike) as I could either not get on the bike or hold it up at stop. I have been diagnosed with ALS and it started in my left leg and moved to my right, lost the ability to walk unassisted and now rely on a wheelchair to get around. I looked at the Spyder as the seat level was lower then my Goldwing Trike, but it to was just a bit to high for me to get on. Then my son took me to the dealer and showed me the Ryker, with his help I got out of my wheelchair and on to a Ryker Rally. We took off and I completely forgot my health issues. We rode for about an hour and then returned to the dealer. We ended up purchasing two 2019 Ryker Rally 900. Even my wife took it out with my son last night (she also rides) and had a blast. We have to return to the dealer this week to pick up the rest of the accessories we purchased. So far we did the driver and passenger comfort seats, passenger backrest (tall) tank bag and one up rear bag. We did order new cross handle bars as they seem to sit higher and have more back reach, but this morning we removed my handle bars and flipped them over and they are now taller with further pull back, for me they are much more comfortable. The one thing I am going to have too change is the foot brake. I have very limited movement in my legs so the brake, even though it is adjustable it is still hard for me to use. I'm looking for a decent hand brake with brake light switch. Once installed I will put on longer brake line and bleed the system and remove foot brake. I would also like a windshield and floorboards, so if anyone has any ideas please drop me a line. So in closing I'll say hello from Oklahoma and I hope to learn more and share in modifying this machine.

  2. #2
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,273
    Spyder Garage
    8

    Default

    Glad to hear of your experience and the purchase of the Rykers.

    ISCI company has been making hand brake set ups for Spyders for many years. They are pricey, but serve a good purpose for those who need the hand assist. I do not know if they have a Ryker version yet...but that is the place to start...IMO.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  3. #3
    Active Member
    Join Date
    Jun 2019
    Location
    Florida
    Posts
    286
    Spyder Garage
    0

    Default

    I was wondering if anyone had reversed the handlebars on their Rykers. I was also thinking of doing the same thing.

  4. #4
    Very Active Member
    Join Date
    Nov 2018
    Location
    N.E. Ohio
    Posts
    520
    Spyder Garage
    0

    Default

    I have heard of a few people flipping the bars with success. cueman

  5. #5
    Active Member
    Join Date
    Jun 2019
    Location
    Florida
    Posts
    286
    Spyder Garage
    0

    Default

    RobVal1987, if possible would you mind posting a photo of what the handlebars look like now that you have reversed them?

    Mine look a bit crooked, but I wonder if that is just an optical illusion. It could have also been the power of suggestion, as I have read that several folks said their handlebars were crooked. Mine rides fine as it is but if I can get a bit more of an upright ride, I'd enjoy it even more. On my Harley, I swapped my Softail handlebars for those from a Heritage and it gave me a more comfortable upright posture. They are almost a baby ape hanger, which made it so that I did not have to lean forward to use them.

  6. #6
    Active Member
    Join Date
    May 2019
    Location
    Washington
    Posts
    110
    Spyder Garage
    0

    Default

    i have been very happy with my calsci windshield, i believe f4 should have their ryker windshield available soon.

  7. #7
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    Yes this windshield is in production now and will be out very soon.
    Don Frank
    F4 Customs
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •