Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2017
    Location
    Ohio
    Posts
    21
    Spyder Garage
    0

    Question Multiple Faults with a P0600 code

    I own a 2011 RSS with 22k miles, runs perfect, no previous trouble. I have a check engine, with a VSS, ABS, DPS Fault with multiple lights on, and the tach randomly drops to zero, but the motor seems to be running fine. It also has a P0600 code. I tried replacing the battery, but it still is showing the Faults. Seems to show more faults at lower speeds, not sure if that means anything. Any help would be appreciated.

  2. #2
    Very Active Member JKMSPYDER's Avatar
    Join Date
    Dec 2012
    Location
    Murphy, NC
    Posts
    1,388
    Spyder Garage
    1

    Default

    The P0600 code says the ECM needs to be updated or replaced.
    2020 F3 Ltd

    Spyderpops Bumpskid
    Spyderpops Brake/Run/Turn Signal LED's
    Lamonster Garage LED Fog Lights and Headlights
    2013 ST-S retired 1/9/16 at 25,061 miles
    2015 F3S sold at 77,565 miles.
    2015 F3-S , BajaRon Plugs Can-Am Red

  3. #3
    Member
    Join Date
    May 2017
    Location
    Ohio
    Posts
    21
    Spyder Garage
    0

    Default

    Thanks for the reply, would that cause all the fault codes I am seeing?

  4. #4
    Very Active Member JKMSPYDER's Avatar
    Join Date
    Dec 2012
    Location
    Murphy, NC
    Posts
    1,388
    Spyder Garage
    1

    Default

    Since the ECM stands for electronic control module it is possible that a problem with the ECM could cause the other faults.
    2020 F3 Ltd

    Spyderpops Bumpskid
    Spyderpops Brake/Run/Turn Signal LED's
    Lamonster Garage LED Fog Lights and Headlights
    2013 ST-S retired 1/9/16 at 25,061 miles
    2015 F3S sold at 77,565 miles.
    2015 F3-S , BajaRon Plugs Can-Am Red

  5. #5
    Active Member
    Join Date
    Mar 2014
    Location
    Alice Springs, Australia
    Posts
    33
    Spyder Garage
    0

    Default

    I had the P0600 code, together with U0126, U1101,U1150 & U1160 last year, and after 5 months at the dealership, it turned out to be a faulty spark plug lead. My 2011 RSS SE5 started to stall when hot, and when started straight after, had an increased RPM. I would suggest to check the resistance of the leads.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •