-
Active Member
Hand Gards
Hi all, cannot find the post but a while ago it was mentioned that there are OEM hand guards for Spyders including my 18 F3L.
Things is, can't find them here in Australia or on North American sites either. BRP has them for the Ryker it seems.
Ordered a set of aftermarket ones but they mostly obscured the low set Rear view mirrors.
Anyone please.
-
Very Active Member
There is no OEM hand guards for the F-3 or the RT that i am aware of.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Don"t know...
I do know you have some alternative mirrors you can install on the F3 if the hand guards are blocking the oem mirrors. On the early GS,RS models they made a extention for the mirrors that moved them up an inch and out 2 inches.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Active Member
Yep, thanks guy;s. don't want to move the mirrors at all but at least i know now there are no OEM ones.
Dealer is ordering in the Ryker ones and, with some small modifications, he thinks he can fit them.
-
65312414-B11C-4082-A338-568FC78BB5FE.jpg
Bark Buster...I have the Tricled convex mirrors..no obstruction of rear view with hand guards
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|