Results 1 to 10 of 10
  1. #1
    Active Member
    Join Date
    Apr 2015
    Location
    Grand Forks, ND
    Posts
    341
    Spyder Garage
    0

    Default 2018 RT I want to sit higher(raise seat)?

    Any ideas on how to elevate the seat height about 1/2 inch on 2018 RT? Can I put spacers under the seat or any other ideas besides buying a new seat?

    Jim

  2. #2
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    Either a seat pad like an Airhawk, or , have an upholstery shop put in denser foam.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  3. #3
    Thinks out loud Jeriatric's Avatar
    Join Date
    Apr 2012
    Location
    "The Skillet" AKA..... La Quinta, Ca
    Posts
    5,106
    Spyder Garage
    0

    Default

    Give Dave a call. He's a site vendor.

    http://www.motorcycledave.com/


    Identify what you have control over and find peace with what you don't.

  4. #4
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,368
    Spyder Garage
    0

    Default

    Quote Originally Posted by Jeriatric View Post
    Give Dave a call. He's a site vendor.

    http://www.motorcycledave.com/
    ….. you may be able (if you bevel the edges of the gel ) to just add it the seat foam WITHOUT making a cavity in your seat foam …. ask Dave …. Mike

  5. #5
    Active Member
    Join Date
    Apr 2015
    Location
    Grand Forks, ND
    Posts
    341
    Spyder Garage
    0

    Default

    Can I put a spacer under the seat on each side to raise it?
    Jim

  6. #6
    Thinks out loud Jeriatric's Avatar
    Join Date
    Apr 2012
    Location
    "The Skillet" AKA..... La Quinta, Ca
    Posts
    5,106
    Spyder Garage
    0

    Default

    Not and have the seat lock. There are far more easy ways(not cheap)ways to elevate your seat. That does not mean it has to be super expensive either.


    Identify what you have control over and find peace with what you don't.

  7. #7
    Very Active Member cruisinTX's Avatar
    Join Date
    Mar 2015
    Location
    Fritch, Tx
    Posts
    770
    Spyder Garage
    1

    Default

    Quote Originally Posted by JimboRTS View Post
    Any ideas on how to elevate the seat height about 1/2 inch on 2018 RT? Can I put spacers under the seat or any other ideas besides buying a new seat?

    Jim
    Check with a local HVAC shop to see if they have a piece of 1/2" thick Arma-Flex insulation large enough to cut the right size and do a test sitting. If that feels good, strip the seat cover back glue the Arma-Flex to you original foam with contact cement then pull the cover back down and staple underneath like it is from the factory. If the 1/2" doesn't feel like enough use a second layer. If the HVAC shop does not have a scrap piece, full 3' x 4' sheets run about $50. I've used Arma-Flex to build about 7 or 8 motorcycle seats over the past 15 years. It is the most comfortable foam I have ever sat on in a motorcycle seat.

    If you deicide to give this a go, shoot me a PM for a few more details on what tools are best to use and a couple of tips on getting the seat cover glued back properly.

    Those who say " I can't" will always be right.
    2014 RT Limited , pewter (magnesium?)

  8. #8
    Very Active Member
    Join Date
    Dec 2015
    Location
    Oakley Utah
    Posts
    8,126
    Spyder Garage
    0

    Default

    Quote Originally Posted by JimboRTS View Post
    Any ideas on how to elevate the seat height about 1/2 inch on 2018 RT? Can I put spacers under the seat or any other ideas besides buying a new seat?
    No, you can't mechanically raise the seat.

    Be careful about putting a pad or pillow on top of the existing seat, as it will not hold you as securely in place when you most need it.
    2014 RTL Platinum


  9. #9
    Very Active Member
    Join Date
    Dec 2015
    Location
    Oakley Utah
    Posts
    8,126
    Spyder Garage
    0

    Default

    Quote Originally Posted by Jeriatric View Post
    Give Dave a call. He's a site vendor.

    http://www.motorcycledave.com/
    2014 RTL Platinum


  10. #10
    Very Active Member 4 MARIE's Avatar
    Join Date
    Apr 2014
    Location
    Beloit Kansas
    Posts
    871
    Spyder Garage
    0

    Default

    Have you ever heard the story of The Princess and the Pea ?

    Really? ONE HALF INCH ?

    How about an extra pair of …. never mind.


    PLease excuse my abruptness, I am not usually stirred this way.
    Flatlander, Navy Veteran, Widower
    Loved my 2014 RTS SE6 Pearl white
    but have a new love now,
    my 2017 RTS SE6 Champagne metallic (Champ)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •