Results 1 to 6 of 6
  1. #1
    Active Member
    Join Date
    Apr 2019
    Location
    Florida
    Posts
    81
    Spyder Garage
    0

    Default Can signature light installed with switch to turn on and off?

    I only have seen one that will automatically on when engine started. Curious to know if there is one that controlled by switch on/off? If they have one what brand?

  2. #2
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    it comes on with the key if properly installed to the connector behind the frunk insert. Just turn on the key to light up your frunk with the lid open.

    Erm. I may have installed it on the GPS circuit not the User circuit. Will check in a day or two.
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

  3. #3
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    When you install it you can always rewire it to a on/off switch placed wherever you want it to be. but it comes without a on/off switch.

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  4. #4
    Very Active Member AY4B's Avatar
    Join Date
    Aug 2014
    Location
    Greenville Tx
    Posts
    2,470
    Spyder Garage
    1

    Default

    Why would you not want it on all the time?
    2017 F3 Limited
    2017 F3 Limited , Lamonster Black Dymond brake pedal with brake rod at #5 Pure Magnesium Metallic

  5. #5
    Very Active Member AY4B's Avatar
    Join Date
    Aug 2014
    Location
    Greenville Tx
    Posts
    2,470
    Spyder Garage
    1

    Default

    Lamonster sells a bright ryder that is the same thing, only cheaper. Easier to install also.
    2017 F3 Limited
    2017 F3 Limited , Lamonster Black Dymond brake pedal with brake rod at #5 Pure Magnesium Metallic

  6. #6
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    Quote Originally Posted by Rattlebars View Post
    it comes on with the key if properly installed to the connector behind the frunk insert. Just turn on the key to light up your frunk with the lid open.

    Erm. I may have installed it on the GPS circuit not the User circuit. Will check in a day or two.
    I checked and I have it plugged into the bike side supplied connector so it should work like the front fender lights - key on - key off.
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •