Page 2 of 2 FirstFirst 12
Results 26 to 42 of 42
  1. #26
    Member
    Join Date
    Jan 2019
    Location
    Georgia
    Posts
    22
    Spyder Garage
    0

    Default

    I just installed Lamonster's Puig windshield. Works better than the stock windshield and looks good.

  2. #27
    Very Active Member Markubis's Avatar
    Join Date
    Jan 2018
    Location
    NH
    Posts
    610
    Spyder Garage
    0

    Default

    Quote Originally Posted by Batbike View Post
    I just installed Lamonster's Puig windshield. Works better than the stock windshield and looks good.
    Lamonster has been my go-to site for getting Ryker accessories. Is that the tinted one that I see on the website? It doesn't take away visibility?

    Can you attach a picture of your Ryker with it on? I only see the up close images on the Lamonster website.

  3. #28
    Member
    Join Date
    Jan 2019
    Location
    Georgia
    Posts
    22
    Spyder Garage
    0

    Default Windshield

    I attached a pic of Lamonster’s Puig windshield. I look over the windshield so the dark smoke is not a factor.
    Attached Images Attached Images

  4. #29
    Active Member
    Join Date
    Nov 2018
    Location
    Virginia
    Posts
    79
    Spyder Garage
    0

    Default

    When you are out in the open on 2 or 3 wheels, or even in a convertible, you will get buffeting. A windshield helps tremendously on taking the chest pressure off of you making you less of a sail.

    Side winds are one thing that creates buffeting; you can't do anything about that. Helmet buffeting is a different thing. One thing you need to know, and this applies to all motorcycles, the helmet buffeting generally comes from below. The height of the windshield is misleading. Many people put tall windshields on their bike thinking wrongly that wind comes in a straight line. Buffeting comes from the low pressure area behind the windshield which is filled in from below. That turbulence in that low pressure area is what causes the buffeting.
    2018 Can Am Spyder F3L, 1995 BMW R1100R, 1988 Suzuki GS250, 2019 Ryker 600 (Wife's)


  5. #30
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,158
    Spyder Garage
    2

    Default

    Quote Originally Posted by Bob204bc View Post
    When you are out in the open on 2 or 3 wheels, or even in a convertible, you will get buffeting. A windshield helps tremendously on taking the chest pressure off of you making you less of a sail.

    Side winds are one thing that creates buffeting; you can't do anything about that. Helmet buffeting is a different thing. One thing you need to know, and this applies to all motorcycles, the helmet buffeting generally comes from below. The height of the windshield is misleading. Many people put tall windshields on their bike thinking wrongly that wind comes in a straight line. Buffeting comes from the low pressure area behind the windshield which is filled in from below. That turbulence in that low pressure area is what causes the buffeting.
    I agree completely with some buffeting coming from underneath, Bob, but can’t agree that the height of the screen makes little difference to helmet buffeting. I replaced a 19” inch screen with the same manufacturer, same model 25” screen (i.e. no changes to lowers, vents, angle etc), which comes to my top lip and helmet buffeting is gone.

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  6. #31
    Very Active Member Markubis's Avatar
    Join Date
    Jan 2018
    Location
    NH
    Posts
    610
    Spyder Garage
    0

    Default

    When are we going to see an F4 Windshield for the Ryker? The last news I saw was it was going to be released about a month ago.

  7. #32
    Member
    Join Date
    Jun 2019
    Location
    Massachusetts
    Posts
    8
    Spyder Garage
    0

    Default

    Anyone have any side view pictures of their Ryker with the Lamonster tinted windshield? Website has front and back pics only. Thanks

  8. #33
    Very Active Member cjackg's Avatar
    Join Date
    Sep 2010
    Location
    Chattanooga TN
    Posts
    1,343
    Spyder Garage
    0

    Default

    Quote Originally Posted by F4 Customs View Post
    F4 Customs will be releasing the new Ryker shield in about 2 weeks. It will give much better coverage and looks great. It will also be made with a re-curve so you can run a shorter shield and get good protection.
    The F4 Shield is made from high optics polycarbonate, sheds rain, is optically perfect, and is highly scratch resistant like no others.
    www.f4customs.com
    waiting on this one.... Any news on when it will be available ?

  9. #34
    Active Member
    Join Date
    Mar 2015
    Location
    Tacoma WA.
    Posts
    131
    Spyder Garage
    1

    Default

    sure will. There aren't many makers of Ryker shields yet, but try to buy one that you can see over.
    2017 F3-S Daytona , Yellow and black

  10. #35
    Active Member
    Join Date
    Mar 2019
    Location
    Ky
    Posts
    88
    Spyder Garage
    0

    Default

    Windshield will improve rider comfort, guess it might help some with strait line stability (larger windshield probably most stable). Other factors within your control are handlebar play (shouldn’t be any), relaxed but firm grip on handlebars (no rigid “death” grip, tire inflation (don’t over inflate), sway bar (if you can afford one at present), proper wheel alignment, suspension settings (not too soft).

  11. #36
    Active Member
    Join Date
    May 2019
    Location
    Washington
    Posts
    110
    Spyder Garage
    0

    Default

    i emailed f4 a few weeks ago and was told they were working on the hardware and would post when it was ready for sale. i however could not wait and bought a calsci sport windshield and what a difference it has made. i really like the way my ryker rides with the windshield.

  12. #37
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    F4 Customs will have the new Ryker Recurve windshield out in about 4 weeks. Sorry for the delay but we really wanted to get it right.
    We will offer clear and tint and it will be wider. We have tested it and its great.
    Don
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  13. #38
    Active Member
    Join Date
    Jun 2019
    Location
    Florida
    Posts
    286
    Spyder Garage
    0

    Default

    I rode my Rally without a windshield for a bit and found that I had to have the wind deflection. I do not like to wear full face shields or goggles since I already where glasses. If you have a decent wind break then glasses are fine. Unfortunately, the Can Am windshield does not reach high enough for me. Don't get me wrong, it does work and it does deflect some wind from me, but it still hits me in the forehead. Two more inches would probably do it.

  14. #39
    Member
    Join Date
    Feb 2020
    Location
    Belmont
    Posts
    1
    Spyder Garage
    0

    Default

    I'm about to get a Ryker with a relocated cluster.
    Looking for windshield suggestions that won't ruin the sleek look, but will still do the work.
    Any ideas?

  15. #40
    Active Member SPYMAN's Avatar
    Join Date
    Nov 2007
    Location
    Nixa, Missouri 65714
    Posts
    340
    Spyder Garage
    0

    Default

    Here are the 3 options Lamonster Garage has to offer!

    http://www.lamonstergarage.com/windshield/
    PE #2735
    RUBBER SIDE DOWN SHINY SIDE UP!!!!!!!!!!
    Never ride faster than your Angel can fly...

  16. #41
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    Here is the F4 Customs Ryker now available. Thanks Don
    330-968-4644 or www.f4customs.com
    https://youtu.be/_4pWGzmPG7k
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  17. #42
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •