-
brakes locked
I got a 2008 can-am spyder my front brakes locks let sit about 10 minutes and they release. Anyone else had this problem .
-
When was the last time you flushed your brake fluid? Sounds like your calipers are binding and may need to be rebuilt or replaced.
-
Very Active Member
Tough one....
Depending on all the facts....last inspected, fluid flushed, pad conditions mileage etc. The best would be to remove the calipers and check that the pistons are free of debris grim etc that is not allowing them to retract when pressure is realeased. Quick check would be to turn the wheels so you can tap on the calipers and see it they realease when locked.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Just brought bike 4 months ago only 6900 mile on it . was inspected March . tapping on it want work . let it set and it will release
-
Check rear wheel if locked up when fronts are locked I would suspect the master cylinder not allowing fluid to return. The fluid probability has never been changed. New fluid and bleeding might help. Bleeding will be tough if master cylinder is gummed up.
-
Very Active Member
If you open a front bleed valve when locked does it release immediately as a small volume of fluid is expelled?
The best substitute for brains & knowledge is....................silence.
-
Very Active Member
I had a brake line fail on my truck, it behaved the same way.
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Going to rebuild brake system this weekend . Hope it solves the problem. Will let know
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|