Results 1 to 2 of 2
  1. 06-13-2019, 03:45 PM #1
    toolie
    toolie is online now
    Active Member
    Join Date
    Nov 2018
    Location
    Rio Grande Valley
    Posts
    62
    Spyder Garage
    0

    Default Red Dust.....Not

    Yesterday I pulled my front sprocket from my 2017 f3 limited. What I found was that Can Am put Kruger paste on the splines at the factory. So all I did was clean the splines and coat them with loctite moly paste. I then cleaned the bolt and coated it with loctite blue 242 and torqued it to 96 ft pounds. By the way I had 6200 miles on it. Bought it last October.
    Reply With Quote Reply With Quote
  2. 06-14-2019, 02:05 AM #2
    MakoShark2
    MakoShark2 is offline
    Active Member
    Join Date
    Nov 2018
    Location
    Lisbon, Portugal
    Posts
    157
    Spyder Garage
    1

    Default

    Just thinking, would it help to spray a little ACF-50 on it?
    2018 F3S , Monolith Black Satin
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules