Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2018
    Location
    Rio Grande Valley
    Posts
    29
    Spyder Garage
    0

    Default Red Dust.....Not

    Yesterday I pulled my front sprocket from my 2017 f3 limited. What I found was that Can Am put Kruger paste on the splines at the factory. So all I did was clean the splines and coat them with loctite moly paste. I then cleaned the bolt and coated it with loctite blue 242 and torqued it to 96 ft pounds. By the way I had 6200 miles on it. Bought it last October.

  2. #2
    Active Member
    Join Date
    Nov 2018
    Location
    Lisbon, Portugal
    Posts
    52
    Spyder Garage
    1

    Default

    Just thinking, would it help to spray a little ACF-50 on it?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •