Noticed on the last ride that we have been bottoming out on somewhat small bumps, especially railroad tracks. So today I popped seat and determined no air in bag. Could not get compressor to kick on, so I added air manually to 40 psi and left for a couple hours and it held. I then started bike and adjusted settings to soft, and the air was released out through the system as it would normally, but then when I adjusted settings back to hard, nothing from the compressor. I have checked the fuse F5 on right side box and it is good.
It appears that the compressor is not working, but wanted to see if there were any other troubleshooting steps people may have for me before I load up and head to dealer.

And to add to the whole issue, my extended warranty ran out on May 20 2019.