3" riser from Spyder City

**Zipper** · 07-02-2009, 01:57 PM

I have the 1" BRP riser already installed. Will I be able to add the 3" riser from RT Sales Spyder City to it? Is there enough cable length to achieve this. Has anyone done this?

Thanks

**FANG** · 07-02-2009, 02:10 PM

Plenty have installed the NMN 3" risers with the BRP 1 " riser with no problems. Don't know anything about the Spyder City risers.

**QuadManiac** · 07-02-2009, 04:43 PM

Should be plenty. I just had to barely pull on the cables to support the 3" SC riser without the BRP 1". Should be easy to get an extra 1".

**bone crusher** · 07-02-2009, 04:45 PM

You might want to wait until R/T has a fix for the steering lock...right now, if you get the riser, you will lose your steering lock function....some might not care, some might.

I park a lot on hills (for some odd reason), so a steering lock is important for me...

I only have the BRP 1" right now...

**kma10-4** · 07-03-2009, 05:18 PM

i do know with a 1 inch brp and NMN 3" they reach cut a couple zip tie's ,no problem.not familiar with the riser's your using

Thread: 3" riser from Spyder City

Thread Tools

Display

3" riser from Spyder City

Posting Permissions