Anyone come up with a Ryker Frunk Lock?

[KC61]

Anyone came up with a lock for the Frunk? I'm thinking maybe a boat glove box lock might work. Thoughts on this?

[KyBill]

Anyone came up with a lock for the Frunk? I'm thinking maybe a boat glove box lock might work. Thoughts on this?

Yes, there’s one out there, on backorder,

[KC61]

Yes, there’s one out there, on backorder,

I saw that and it looks the same as this one on Amazon for $10

https://www.amazon.com/OWACH-Button-...gateway&sr=8-1

[safecracker]

Actually there is a lock already installed on the Ryker Frunk. It does not have a cable attached to it. There is a You Tube video out there that shows it. I believe a guy in Texas posted the video. Bruce

[KC61]

Actually there is a lock already installed on the Ryker Frunk. It does not have a cable attached to it. There is a You Tube video out there that shows it. I believe a guy in Texas posted the video. Bruce

I found the video. But you still need some kind of mechanism to lock it.

[KyBill]

I saw that and it looks the same as this one on Amazon for $10

https://www.amazon.com/OWACH-Button-...gateway&sr=8-1

Sure does.

[bcraig]

Sure does.

The one from Amazon doesn't include the $30 paper templates. LOL

[campermac]

********* has a lock for the front compartment. I just ordered one today and it was less than $50

[bcraig]

********* has a lock for the front compartment. I just ordered one today and it was less than $50

This is the same one and you can download the instructions from S******** to use as a guide

https://www.amazon.com/OWACH-Button-...gateway&sr=8-1

[KID Ryker]

I saw that and it looks the same as this one on Amazon for $10

https://www.amazon.com/OWACH-Button-...gateway&sr=8-1

Looks like a better deal. $40. dollars cheaper.

[MDLNB]

Hey Kid, is that the prototype Ryker Rally you got there?

[leenanj]

If anyone made a template to install the lock please upload it!

[KC61]

I did mine tonight in about an hour or so. It's not hard. I paid like $15 for 2 of them on Amazon. Same lock as a boat glove box. Here's a link

https://www.amazon.com/X-Haibei-Repl...sr=1-1-catcorr

[leenanj]

I did mine tonight in about an hour or so. It's not hard. I paid like $15 for 2 of them on Amazon. Same lock as a boat glove box. Here's a link

https://www.amazon.com/X-Haibei-Repl...sr=1-1-catcorr

Good find, you have any measurements on where to drill the 1 inch hole?

[KID Ryker]

Hey Kid, is that the prototype Ryker Rally you got there?

Ryker 9.jpg No I went the other way

[KC61]

I will post some pics tomorrow

[Wifesaidyes]

Good find, you have any measurements on where to drill the 1 inch hole?

Seems that 1in hole (center) must be drilled at 1.5in from the top edge of the lid

[leenanj]

Seems that 1in hole (center) must be drilled at 1.5in from the top edge of the lid

Thank you, I will be installing mine soon.

I see there is a circle in the underside of the plastic lid in about that same place, how does that line up?

[KC61]

You can eyeball the center, I did. But yes, 1.5 inches from the edge of the hood. I used the plastic nut against the rim where the lid seals for my measurement. Then I drilled the hole with a step bit.

[Batmobil-F3]

here is an installation video for a ryker frunk lock. You can buy the lock at Amazon and use the vidoe to install it.

[KC61]

I would recommend removing the frunk lid completely, much easier to work with and less of a chance of screwing up the hinge.

[leenanj]

Installed my frunk lock from Amazon today, came out great!

I just realized from looking at that video I put my handle on facing forward, opposite than in the video.

But it seems more natural to grab it that way so going to leave it.

2019-07-30 07-42-58.jpg

[Wifesaidyes]

Also got the Amazon one - will install it coming week-end
I agree with Jimmy that handle should be facing forward - thanks for the feedback

[KC61]

Installed my frunk lock from Amazon today, came out great!

I just realized from looking at that video I put my handle on facing forward, opposite than in the video.

But it seems more natural to grab it that way so going to leave it.

2019-07-30 07-42-58.jpg

I put mine on the same way, made more sense.

[MDLNB]

I imagine that the reason for putting the handle on the other way is to make it more aerodynamic or so that flying bugs or debris doesn't get hung up on it. Just a thought, even though it seems more logical to put the handle forward so that it would be a natural way to open the door.