All,

Enough videos on this, just to say I'm done installing the Baja Ron preload adjusters on mt 2018 RTL.
Some thoughts:
  • Baja Rons instructions are great. Written to the level that anyone can do it.
  • The left side top bolt is definetly harder than the right, but not so bad that you can't actually get the bolt back in at the original orientation. I installed by hand the upper bolts with the bolt facing rearward as installed from the factory.
  • Baja Ron spring compressors are great. If he doesn't need them back I'll probably keep them.
  • Gained about 1/4" ride height, it will probably settle back to the original position.
  • I'm skeered of spring compressors, see the picture. Really stabilized the spring/compressor during installation.

Spring Compressor-Controlled.jpg