-
2013 Spyder ST
What is the best way to effectively improve air flow on 2013 ish ST Model
-
Ozzie Ozzie Ozzie
Airflow around/thru the tupperware?? Or airflow into the engine?
The tupperware benefits from a 2014 panel upgrade, quite a few had that done to reduce the under-tupperware heat; while the airflow intothe engine can be improved by putting a few holes of about 2-2.5" dia into the air intake cover & getting an ECU upgrade. Or you could remove all the black placcy intake trunking & filter etc & fitting one of JT's CNC air filter kit intakes, but I don't know if they are still being sold/marketed?!
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
2013 STS Engine Airflow
I have a 2013 STS that is being reassembled (in my garage) as we speak.
I removed all of the Aircleaner Air Box and the Resonator. this action created a huge amount of free flow airspace.
Replaced the Sparkplugs and Wires and performed a Canisterectomy.
Then installed a JT Air Cleaner. It takes a bit of trimming on the plastic bits above the airfilter to get everything to fit.
Yes, JT still has the Air Cleaner assembly for sale,
I also drilled several 3" holes in the belly pans and had the 2014 side panels installed.
Air flow in now incredible and heat is significantly reduced.
Sorry no pictures until I get back in town on Tuesday.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Here you can have a look to the newer tupperware from 2014-models with extra air flow
20171012_165222_Burst01.jpg
-
Looks Great, where did you get the 2014 tupperware? not free I'm guessing..
-
Very Active Member
Originally Posted by wmercer
Looks Great, where did you get the 2014 tupperware? not free I'm guessing..
there was a good will upgrade that may still be in effect just hard to find parts or dealer that knows what to ask for. FYI mine @54k mike with the stock tupperware & only heat issue I had was a warrantied hose clamp on thermostat.
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Talk to your local CanAm dealer. Side panels for the 2013 ST are a goodwill offering from CanAm
The side panels can be ordered and installed by the dealer at no cost to you.
https://www.spyderlovers.com/forums/...ls#post1146306
See post #391 kit and for part numbers.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Very Active Member
Originally Posted by Haze
Talk to your local CanAm dealer. Side panels for the 2013 ST are a goodwill offering from CanAm
The side panels can be ordered and installed by the dealer at no cost to you.
https://www.spyderlovers.com/forums/...ls#post1146306
See post #391 kit and for part numbers.
FYI link is 404 not found
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Active Member
Might be good will in. uSA but not in their home country of origin. Poor engineering on BRP part on ST-S, yet the RT got the kit in Canada.
-
Member
I just called my dealer here in Oklahoma and they told me that BRP has free 14' replacement panels only for the RT's & not ST.
2013 ST-S , Large Brake - Show Chrome Circuit Yellow Metallic
-
Very Active Member
Originally Posted by MusicMike
I just called my dealer here in Oklahoma and they told me that BRP has free 14' replacement panels only for the RT's & not ST.
It's possible your dealer doesn't know about it (there was no recall or TSB if I remember correctly.) It also could be that since the ST was discontinued there is no inventory of 2014 body panels left.
I would reach out directly to BRPcares and see if they are still doing it.
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
Spyder States Visited
-
Member
Originally Posted by Trbayth
It's possible your dealer doesn't know about it (there was no recall or TSB if I remember correctly.) It also could be that since the ST was discontinued there is no inventory of 2014 body panels left.
I would reach out directly to BRPcares and see if they are still doing it.
I will try BRP Cares.
Thx!
2013 ST-S , Large Brake - Show Chrome Circuit Yellow Metallic
-
got 14 panels for the 13
My godson is the parts mgr at a Can-Am dealership. Tried to get gratis panels for a new to my wife 2013 ST. Godson chatted with the regional rep - no dice on panels free sycamore, at least here. Bought some (bit the bullet) and installed. Nice difference.
Last edited by Peter Aawen; 04-16-2021 at 12:23 AM.
Reason: 22013
-
Active Member
There is no recall for it. It's more of a courtesy from Can Am if the customer comes in complaining of high heat while riding. This a "the squeaky wheel gets the grease" kind of situation here.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|