Results 1 to 17 of 17
  1. #1
    Active Member SmoovOpRatoR's Avatar
    Join Date
    Nov 2015
    Location
    West Coast, Canada
    Posts
    67
    Spyder Garage
    1

    Default DynoJet PowerVision Help

    Hey Folks,
    I recently got a DynoJet Power Vision model PV3-25-05 for my 2015 Spyder F3-S. Now that I've gotten some good weather I figured it was time to try the tunes. I am able to connect the DynoJet unit to my laptop and it turns on and appears to have tunes preloaded, however when I go to connect it to the data port on my Spyder it (power vision) won't boot up. I've tried connecting the unit to just the Spyder by itself and to the Spyder and my Laptop at the same time and it won't do anything. I've also tried it with the Spyder running and not running but just the ignition key on. Anyone have some suggestions or know of something I may have overlooked when trying to hook it up?
    Thanks in advance.

  2. #2
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    Yep they sent your the wrong cable for one. Next you most likely will have to send in your ECU .. But wait for the correct cable.

    Contact Dyno jet for a new cable. Took them 3 times to get me the right one.

  3. #3
    Active Member SmoovOpRatoR's Avatar
    Join Date
    Nov 2015
    Location
    West Coast, Canada
    Posts
    67
    Spyder Garage
    1

    Default

    Quote Originally Posted by trikermutha View Post
    Yep they sent your the wrong cable for one. Next you most likely will have to send in your ECU .. But wait for the correct cable.

    Contact Dyno jet for a new cable. Took them 3 times to get me the right one.
    I might have to send in my ECU? I mean one of the biggest reasons I picked the dynojet option over Monster Fuel refloash was not having to remove and ship the ECU...

  4. #4
    Active Member JS3535's Avatar
    Join Date
    Sep 2017
    Location
    Clovis, CA
    Posts
    184
    Spyder Garage
    1

    Default

    This is why I went with Monster...heard too many bad things about DynoJet. Sorry you are having problems. How’s the windshield working?

  5. #5
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    It's not a bad thing. Get the new cable and see if it will open the tune. If not yes the ecu will have to be removed. They do not open it up. It only takes 10 minutes to remove on my rt. Have them get you a ship label if you go that far and they overnight it back to you. There has been other threads on this topic. Good luck. With monster if something goes wrong you have to send it back everytime. Dynojet tune can be returned to stock.

  6. #6
    Member WindTherapist's Avatar
    Join Date
    Oct 2017
    Location
    Missouri
    Posts
    20
    Spyder Garage
    1

    Default

    I had to send my ECU in as well. Its painless. They sent a call tag from Fedex to them and shipped back overnight. The whole process took 3 days. Once I got it back it took them a day or two to load the map onto there serve, but I was able to load the file to the bike immediately. Once its on there server you can go into the software and look at all the settings. The nice thing about the Dynojet is you can actually see whats going on and how it effects the bike. Very cool

  7. #7
    Active Member SmoovOpRatoR's Avatar
    Join Date
    Nov 2015
    Location
    West Coast, Canada
    Posts
    67
    Spyder Garage
    1

    Default

    Quote Originally Posted by JS3535 View Post
    This is why I went with Monster...heard too many bad things about DynoJet. Sorry you are having problems. How’s the windshield working?
    Windshield is great! Now I just need more power

  8. #8
    Active Member SmoovOpRatoR's Avatar
    Join Date
    Nov 2015
    Location
    West Coast, Canada
    Posts
    67
    Spyder Garage
    1

    Default

    So I've been emailing with DynoJet and they requested pictures of the supplied cable. They have said I was supplied with the correct cable but that they will send a new one just to be sure that I didn't get a faulty one. I'll update once I get the replacement cable and hopefully that is the issue.

  9. #9
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    I got the same excuse. Send pictures on the bike pinout and the one you got in the box.

  10. #10
    Very Active Member Lew L's Avatar
    Join Date
    Mar 2015
    Location
    forrest above Reno, Nv
    Posts
    1,929
    Spyder Garage
    1

    Default

    Quote Originally Posted by JS3535 View Post
    This is why I went with Monster...heard too many bad things about DynoJet. Sorry you are having problems.
    Very happy with my Monster FI flash of the ECU. Works great.
    Kaos----- Gone but not forgotten.

    2014 RTS in circuit yellow, farkeling addiction down to once every few months. Flashed ECU installed

  11. #11
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    Why is monster mentioned on a dynojet topic?

  12. #12
    Active Member JS3535's Avatar
    Join Date
    Sep 2017
    Location
    Clovis, CA
    Posts
    184
    Spyder Garage
    1

    Default

    Quote Originally Posted by trikermutha View Post
    Why is monster mentioned on a dynojet topic?
    Because it’s Wednesday & I’m having pork chops for dinner.

  13. #13
    Very Active Member Wildrice's Avatar
    Join Date
    Apr 2015
    Location
    Westerville, OH
    Posts
    823
    Spyder Garage
    1

    Default

    Quote Originally Posted by SmoovOpRatoR View Post
    I might have to send in my ECU? I mean one of the biggest reasons I picked the dynojet option over Monster Fuel refloash was not having to remove and ship the ECU...
    Exercise caution if you are modifying the map--especially the timing.. They should have several ecu maps already tested to choose from. Good Luck

  14. #14
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    Quote Originally Posted by JS3535 View Post
    Because itís Wednesday & Iím having pork chops for dinner.
    That's makes sense

  15. #15
    Very Active Member Lew L's Avatar
    Join Date
    Mar 2015
    Location
    forrest above Reno, Nv
    Posts
    1,929
    Spyder Garage
    1

    Default

    Quote Originally Posted by trikermutha View Post
    Why is monster mentioned on a dynojet topic?
    Sorry I expanded to topic to include ECU flashes. I'm not computer savy enough to reprogram the ECU as I can bearly use my phones capabilities. The plug and play Monster flash was installed in literally minutes and again--- I'm happy with it.

    I didn't mean to step on anybodies toes. 50 Lashes with a wet noodle

    Lew L
    Kaos----- Gone but not forgotten.

    2014 RTS in circuit yellow, farkeling addiction down to once every few months. Flashed ECU installed

  16. #16
    Active Member JS3535's Avatar
    Join Date
    Sep 2017
    Location
    Clovis, CA
    Posts
    184
    Spyder Garage
    1

    Default

    I started it, sorry. I’ll take 100 lashes...don’t threaten me with a good time!
    It really is a sickness!

  17. #17
    Very Active Member trikermutha's Avatar
    Join Date
    Sep 2014
    Location
    USA
    Posts
    2,959
    Spyder Garage
    0

    Default

    Its all good just playing with Y-ALL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •