Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 51
  1. #26
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Ryker 4.jpg OK if I miss anything I am sorry. The plate you see you will have to get fabricated to what style bags you want. Ryker 3.jpg These bag and rear top case mounts are GIVI for a 2013 NC700X Honda. The passenger spot plate will be made to fit the angle of the bag you want. The plate is set on and bolted to the Max mount. I also purchased the passenger seat to get the (P4 cross member) and the (P2 & P3 passenger foot rest) P4 for more strength on the max mount. I will use the passenger foot rest in the down position when the bags are on and loaded. For the VSS calibration. Any bag can be used to your liking. Left bag must be set up or out to clear the drive shaft housing. I went more up then out.Ryker 6.jpg These mount fit the Givi Trekker Outback. 37L side 42L top case. If I missed any thing you can PM me. Glad to help. Going to Rolla Missouri Sunday to visit M2 Shocks now I have my stock shock on 5. He will be building Shocks for the 900ace. I have enough room on my Ryker for a week trip. Clothes, Cold weather, Wet weather, Some tools, a small ice chest and a small fan strapped on passenger spot for motel noise.

  2. #27
    Very Active Member
    Join Date
    Nov 2018
    Location
    N.E. Ohio
    Posts
    520
    Spyder Garage
    0

    Default

    Would it work to have top box in line with side cases so one could put a back pad on top box for back support? cueman

  3. #28
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,767
    Spyder Garage
    1

    Default

    Quote Originally Posted by KID Ryker View Post
    These bag and rear top case mounts are GIVI for a 2013 NC700X Honda.
    Is that because you already had them or you determined they were the easiest to adapt to the Ryker?

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

  4. #29
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by IdahoMtnSpyder View Post
    Is that because you already had them or you determined they were the easiest to adapt to the Ryker?
    Already had the mounts, very easy to adapt to the ryker max mount. But most of all I like these bag and they don't stick way out have a lot of room (had to buy). The mounts for the NC700X are very easy to work with.

  5. #30
    Member
    Join Date
    Jul 2019
    Location
    Pittsburgh PA
    Posts
    6
    Spyder Garage
    0

    Default

    Love it, thats the route I,m going too

  6. #31
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Need any help let me know.

  7. #32
    Very Active Member
    Join Date
    Jun 2011
    Location
    Alamogordo, NM
    Posts
    692
    Spyder Garage
    0

    Default

    Someone who has the ability to make Kid Ryker's design in quantity should set up production and of course give a cut of the action to Bro Kid Ryker.

    Or better yet...........K R , set up production your self..........
    Dean O
    Gran Pa Hoon
    Founder San Jose BMW
    Builder of the Motorcyclist Cafe Barn and Bunkhouse
    Alamogordo, NM

    '20 Spyder F3 L

  8. #33
    Member
    Join Date
    May 2019
    Location
    Clearwater, FL
    Posts
    14
    Spyder Garage
    0

    Default

    looks good would be interested if you decide to sell the mounts

  9. #34
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by old Timer View Post
    Someone who has the ability to make Kid Ryker's design in quantity should set up production and of course give a cut of the action to Bro Kid Ryker.

    Or better yet...........K R , set up production your self..........
    GIVI could do it

  10. #35
    Active Member
    Join Date
    Jan 2013
    Location
    Glendale AZ (formerly Oz, Albury NSW)
    Posts
    158
    Spyder Garage
    0

    Default

    Quote Originally Posted by KID Ryker View Post
    no

    What GIVI rack arms did you use?
    Aprilia Mana 850GT, 1988 BMW K75S, Piaggio MP3 400 (sold), Moto Guzzi Nevada 750 (modified), Puch (Sears Allstate SR175), 2010 Honda Insight Hybrid

  11. #36
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by Trevor G View Post
    What GIVI rack arms did you use?
    2013 Honda NC700X

  12. #37
    Member
    Join Date
    Aug 2019
    Location
    Melbourne, Australia
    Posts
    7
    Spyder Garage
    0

    Default

    Was wondering what it does with the extra load then realised it’d be no worse than a passenger. Good job!

  13. #38
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by Haphazard72 View Post
    Was wondering what it does with the extra load then realised it’d be no worse than a passenger. Good job!
    Have not carried a passenger. I think the Ryker rides better loaded. Marcus at M2 Shocks also thought the same thing.

  14. #39
    Active Member
    Join Date
    Mar 2019
    Location
    Depoe Bay Oregon
    Posts
    135
    Spyder Garage
    0

    Default

    Well done!!

  15. #40
    Active Member Zoot's Avatar
    Join Date
    Mar 2019
    Location
    AZ
    Posts
    181
    Spyder Garage
    0

    Default

    Looks like nice fabrication.
    I would be a bit concerned with having the weight so high and far to the rear. If you carry a passenger it changes the calibration of the VSS, have you engaged that switch?

  16. #41
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by Zoot View Post
    Looks like nice fabrication.
    I would be a bit concerned with having the weight so high and far to the rear. If you carry a passenger it changes the calibration of the VSS, have you engaged that switch?
    YES. I like it better with out the foot rest down.

  17. #42
    Very Active Member eddieshep999's Avatar
    Join Date
    Oct 2010
    Location
    Broadstone,Poole, Dorset, UK
    Posts
    1,210
    Spyder Garage
    0

    Default

    Very impressive
    No doubt BRP would consider doing something similar and call it a Ryker adventurer
    Or even an RT or F3 if they go over to shaft drive for off road use
    That would take on the BMW, Triumph, Honda etc segment of that market
    Eddie Sheppard
    Poole Dorset UK

    Get a Spyder - See the World


  18. #43
    Active Member
    Join Date
    Sep 2019
    Location
    New Jersey
    Posts
    127
    Spyder Garage
    0

    Default

    With this design can you just use the top case with passenger seat?

  19. #44
    Active Member
    Join Date
    Jun 2019
    Location
    Florida
    Posts
    286
    Spyder Garage
    0

    Default

    If you are going long distance, you might consider a backrest. After all, you have plenty of room for one.

  20. #45
    Member
    Join Date
    Apr 2019
    Location
    Tennessee
    Posts
    26
    Spyder Garage
    0

    Default

    I also mounted saddle bags on both sides and a trunk behind the passenger seat. Also, I added two speakers on the rear. Consider it a mini spyder LOL

    Ryker 1.jpg

    Ryker 2.jpg

  21. #46
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,209
    Spyder Garage
    0

    Default

    Well done.
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  22. #47
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by TNRyker View Post
    I also mounted saddle bags on both sides and a trunk behind the passenger seat. Also, I added two speakers on the rear. Consider it a mini spyder LOL

    Ryker 1.jpg

    Ryker 2.jpg
    What a good job. Like to see a closeup of the mounts.

  23. #48
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    Quote Originally Posted by Switchback12 View Post
    With this design can you just use the top case with passenger seat?
    No I can not use the passenger seat with the why I mount my bags. But the new driver back rest I will be able to use it.

  24. #49
    Active Member KID Ryker's Avatar
    Join Date
    Aug 2015
    Location
    Crosby,Texas
    Posts
    372
    Spyder Garage
    1

    Default

    This set up does nothing to make the bike handle bad, if anything I think it handles better. I ride with no passenger so I can carry plenty of gear. Loaded I would still carry a passenger if needed. I have changed the shocks with M2 which have helped a lot.

  25. #50
    Active Member
    Join Date
    Sep 2019
    Location
    New Jersey
    Posts
    127
    Spyder Garage
    0

    Default

    Quote Originally Posted by TNRyker View Post
    I also mounted saddle bags on both sides and a trunk behind the passenger seat. Also, I added two speakers on the rear. Consider it a mini spyder LOL

    Ryker 1.jpg

    Ryker 2.jpg
    Nice job, would love to see the mounting brackets

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •