Any options to add Hazard lights to North American Rykers?

[NascarRyker]

Has anyone seen options to add hazard lights to the ryker North America version

[Chupaca]

Didn't know it had none....if they are still running the flashers through the instrument cluster could be difficult and you would have to wire up your own out side system.

[Aufgeblassen47]

I just avoid having hazards.

[mikeyuberalles]

Has anyone seen options to add hazard lights to the ryker North America version

If you put the tryke in reverse, the lights blink just like hazard lights would.

[SwiftyDS]

Unfortunately it only flashes in reverse when the park brake is off.

I’ve got a Rally Ryker in the U.K. and discovered you can order the Hazard Switch made for the Russian market - part number 219400932. I ordered it and it is just the switch, bracket and wiring that goes into pins 5 and 6 in the connector block under the left hand fairing panel. Cost in U.K. was around £50

[KyBill]

I wonder is simply adding the switch would be sufficient or if there are programming or other splices needed.

If you do make this mod please update us with the results. That is a mod I would consider doing.

[KC61]

There has been kits around for a long time to do this very thing

https://www.customdynamics.com/metric-4-way-hazard-kit

[KyBill]

Yes but thats beyond adding OEM switch to a circuit designed to accept it.

[KC61]

Yes but thats beyond adding OEM switch to a circuit designed to accept it.

The OP wanted options to add flashers, I gave him an option. What's the problem?

[KyBill]

The OP wanted options to add flashers, I gave him an option. What's the problem?

Maybe none. I’ve heard its not a good idea to hang things on a system using Can Bus unless made for it. None of my prior bikes had Can Bus but the Custom Dynamics unit is for incandescent or LED, not sure if it would introduce noise from the included flasher.

[Jsmith8695]

....attached link to instructions-
http://instructions.brp.com/content/...l_part_number=