Results 1 to 8 of 8

Thread: Mirror

  1. #1
    Member
    Join Date
    Jul 2016
    Location
    Bronx NY
    Posts
    7
    Spyder Garage
    1

    Default Mirror

    Hey guys Have a question. My right side mirror on my 2015 ST Limited, Shake a lot, here's a photo of the mirror and it seems to be opening up at the seam. Has anybody had this problem and what can I do? No Magnets for ST's Thank You.
    Attached Images Attached Images

  2. #2
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    3,009
    Spyder Garage
    0

    Default

    Certainly looks like the mirror casing is coming apart! Have you tried removing the mirror & seeing if the covering sections are all fixed properly?
    2013 RT Ltd

  3. #3
    Active Member ARNIE R's Avatar
    Join Date
    Mar 2017
    Location
    Leesburg, VA
    Posts
    204
    Spyder Garage
    1

    Default

    Bottom piece looks like it is in place. The top looks like it is being "pushed" up. Make sure the wiring harness is sitting inside properly. It is a tight fit, but if it isn't laying down correctly, it may be be contributing to the misfit.
    2014 ST-S Cognac

  4. #4
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier loUiSiAna
    Posts
    4,001
    Spyder Garage
    1

    Default

    Quote Originally Posted by ARNIE R View Post
    Bottom piece looks like it is in place. The top looks like it is being "pushed" up. Make sure the wiring harness is sitting inside properly. It is a tight fit, but if it isn't laying down correctly, it may be be contributing to the misfit.
    when I replaced mine with the chrome accents there was not much there to lock in place careful when removing as the springs clips brake all too easily. I believe there were 2 little screws barely accessible behind the mirrors(not 100% sure) will look if I still have the info somewhere. *note did not have to remove mirrors to install, just the wind deflectors* & with yours separated it can get water & dust in around the led blinkers , ya you need to seal & or fix sooner.
    Found the info FYI you need to remove the lower 1/2 first; this gives access to the screw holding top 1/2 on. 39FB8CAF-002F-4B41-BA6C-A0F2AC304DD4.jpg6782AA52-102E-4BBC-B7EA-51E9FE79BC33.jpg
    A84C15D3-EBBF-4FB9-85C9-8BE7890C7E4D.jpg it has a note on pic 3 * “make sure she’ll is well inserted into support screw” P1 is the shell 1 is the support screw: looks like where you’d came off. Hope this helps
    Last edited by Bfromla; 05-05-2019 at 04:08 PM. Reason: *info note & pics

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ &brake light strips,
    wide vue mirrors
    Lid lox
    sawblade mowhalk fender accents
    minispyder dash toy
    Pakitrack
    FLO (Frunk Lid Organizer)
    BRP trailer hitch & 622 trailer (with its own list: Spyderpops Lighted Rear Bumpskid, LineX protection on sides, led trim lighting amber front& red rear, stand& tongue handle)THX Cruzr Joe!
    (pics in album)

  5. #5
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier loUiSiAna
    Posts
    4,001
    Spyder Garage
    1

    Default

    Any update??

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ &brake light strips,
    wide vue mirrors
    Lid lox
    sawblade mowhalk fender accents
    minispyder dash toy
    Pakitrack
    FLO (Frunk Lid Organizer)
    BRP trailer hitch & 622 trailer (with its own list: Spyderpops Lighted Rear Bumpskid, LineX protection on sides, led trim lighting amber front& red rear, stand& tongue handle)THX Cruzr Joe!
    (pics in album)

  6. #6
    Member
    Join Date
    Jul 2016
    Location
    Bronx NY
    Posts
    7
    Spyder Garage
    1

    Default

    The Mirrors on the ST are different then the one's on the RT's Clips on RT are on the mirror mount on the ST on the Bike.IMG_20190529_151727.jpgThat' s the new clip I replaced the old one.

  7. #7
    Member
    Join Date
    Jul 2016
    Location
    Bronx NY
    Posts
    7
    Spyder Garage
    1

  8. #8
    Active Member ARNIE R's Avatar
    Join Date
    Mar 2017
    Location
    Leesburg, VA
    Posts
    204
    Spyder Garage
    1

    Default

    Quote Originally Posted by Emilio Velez View Post
    Yes, that top clip is the weakest link in the system.
    2014 ST-S Cognac

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •