-
2015 RT Front grills
I received my front grills from Lamonster, how do I remove the existing grills?
-
Very Active Member
Not sure...
As far as I remember you don't remove the originals but newer models from other suppliers could be different. If the instructions do not show or mention their being removed then theirs just mount in front of the OEM ones....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Lamonster’s video shows them removed because he vacuums the inside.
-
Very Active Member
Originally Posted by Benmannino
Lamonster’s video shows them removed because he vacuums the inside.
Just looked at the breakdown on cheapcycleparts.com and it may be a task to get them out of there. Looks like they are held in with screws between body parts but not sure if you have to remove the whole front panel around the frunk to get there. Maybe someone with a shop manual can help....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Several years ago I purchased a set of grills( 1 with a spyder and the other with R/T ) these were installed in front of the originals. The original grills are still on the bike. I'll post pictures of mine. Here are some pictures: Spyder Grills RT 003.jpg Spyder Grills RT 001.jpg, Spyder Grills RT 002.jpg.
In front of the originals there is a groove where the new grills would go.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Here are some pictures of the grills that I have on my spyder: Spyder Grills RT 002.jpg, Spyder Grills RT 003.jpg.
Hope the pictures help.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Here are some pictures of the grills that I have: Spyder Grills RT 002.jpg, Spyder Grills RT 002.jpg, Spyder Grills RT 001.jpg.
Hope this helps.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
I have the same ones (spyder) as Deanna. Only change I made was, I figured the body of the spyder was still a large hole for debris to get in, so I put screen door mesh behind them. I used spray adhesive to attach the mesh to the grill. It's been 2 years, and 36,000kms, and the screen is showing no signs of coming off.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
Originally Posted by bcer960
I have the same ones (spyder) as Deanna. Only change I made was, I figured the body of the spyder was still a large hole for debris to get in, so I put screen door mesh behind them. I used spray adhesive to attach the mesh to the grill. It's been 2 years, and 36,000kms, and the screen is showing no signs of coming off.
The ( spyder) grill has a moth. The ( grills) are still look new. I have 24,553 miles on my spyder and still going strong!
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Thank you guys, but if you you tube Lamonster it looks like the old screens have been removed, and he installs mounting plugs that you screw in the new grills. Also shows him vacuuming the interior.
-
Very Active Member
The new grill go near the front of the tunnel. The old grills stay in place
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
I rewatched the video, I was wrong I see that the screens are still there. Thanks
-
Very Active Member
Originally Posted by Benmannino
I rewatched the video, I was wrong I see that the screens are still there. Thanks
Yep, I was going to post this but beat me to it ..... I DIY'ed my grills and made them removable, so I could clean the actual Radiators .... I actually removed the OEM grills from the inside with the Frunk off .... They are mounted early in the assembly process of putting the many pieces of the Frunk together .... I just cut them out ( very carefully ) and used the OEM mesh for my new grills ..... Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|