|
-
 Tri Axis Adjustable Handlebar:
Anyone have a dealer install and what was the charge for TriAxis Adjustable Handlebar. I purchased a set in the winter.
-
Very Active Member
Its about 6 hrs labor so not cheap. I have done a few sets and can sometimes beat that time if I get every step right and do not have to back up.
-
Very Active Member
I bought mine as part of the OTD deal and the installation charge was $325. The labor and that for other accessories I purchased as part of the deal was discounted like 15-20%, don't remember exactly.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
Very Active Member
 Same here. I got the adjustable backrest and Tri-Axis bars as an OTD deal and the labor charges went way down. I think the dealers charge around 2.5-3 hours.
Finless Bob made a 3 part video beginning here; https://youtu.be/N7DPxDzWx4g. I'm still learning how to take the panels off this thing, and I convinced myself having the dealer do it was more pain free for me.
h0gr1der
2018 RT Limited Blue/Chrome SE6 *Tri-Axis Bars*Adjustable Driver Backrest*175/55R15 Vredestein Front, 205/60R15 Vredestein Rear Tires*Baja Ron Front Spring Pre-Load Adjusters*Misty Mountain Sheepskin seat cover*Centramatic balancers *Garmin Zumo 595LM GPS*KOTT Grills*BajaRon swaybar*SpyderPops Alignment*Missing Belt guard*Magnetic Mirrors*Custom Rear Adjustable Shock*360° LED Headlights & Foglights*Progressive front fender turn signals
States Visited on Less than 4 wheels.
-
 Originally Posted by Al_lockup
Anyone have a dealer install and what was the charge for TriAxis Adjustable Handlebar. I purchased a set in the winter.
Thank you all for the info, I will check with 2 dealers in CT.
Oh, 1 other question would you say the bars are worth it?
-
Very Active Member
I'm short with some spinal damage, so if I can't access all the controls without stretching or slumping, then riding is out for me. The Tri-Axis bars coupled with the adjustable driver backrest keep all my broke stuff aligned over my hips, which minimizes pain. For me 10/10 I would do it again.
h0gr1der
2018 RT Limited Blue/Chrome SE6 *Tri-Axis Bars*Adjustable Driver Backrest*175/55R15 Vredestein Front, 205/60R15 Vredestein Rear Tires*Baja Ron Front Spring Pre-Load Adjusters*Misty Mountain Sheepskin seat cover*Centramatic balancers *Garmin Zumo 595LM GPS*KOTT Grills*BajaRon swaybar*SpyderPops Alignment*Missing Belt guard*Magnetic Mirrors*Custom Rear Adjustable Shock*360° LED Headlights & Foglights*Progressive front fender turn signals
States Visited on Less than 4 wheels.
-
Very Active Member
Would buy them again in a heartbeat.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
Very Active Member
Originally Posted by JayBros
Would buy them again in a heartbeat.
-
Originally Posted by JayBros
I bought mine as part of the OTD deal and the installation charge was $325. The labor and that for other accessories I purchased as part of the deal was discounted like 15-20%, don't remember exactly.
What is the OTD deal?
-
Very Active Member
Originally Posted by lilluke
What is the OTD deal?
That is a package deal price (OTD = Out The Door). When you buy a bike and add a bunch of stuff the dealer will usually give you a discount on accessories if you have them installed at the same time. Package deal OTD price for each item.
-
Active Member
Dealer installation on mine was about $350.
2014 Spyder RT Limited SE6
BRP Tri Axis Adjustable Handlebars
BRP Adjustable Wind Deflectors
BRP RT Passenger Armrest
BRP Driver's Backrest
BRP Travel Cover
Baja Ron Swaybar
SpyderPops KOTTS
SpyderPops Bump Skid
Lamonster NVB Highway Brackets w/ Gripper Pegs
Lamonster LED Headlights & Fog Lights
Custom Dynamics HMT Brake Light
Show Chrome 7.5 inch Spiral Antenna
SpyderFlap Mud Guard
Helmetlok w/ T-Bar Extension
Hopnel 5PC Luggage Set
Airhawk R Seat Cushion
Rivco Dual Flag Mount
-
Very Active Member
3.0 hours at my dealer and it was the best money I put in two Spyders.No more pain between the shoulder blades.
-
Active Member
I had one installed last month. 3 hours labor @ 110/hr = 330.00.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
