-
Active Member
Issues with F3 limited
It seems the F3 limited gets “confused”. If I turn the key on, hit the mode button to allow things to progress, then try to disable the parking brake-the computer gets confused that even though the parking brake releases, the indicator light remains on... anyone had a similar situation? If I change the pattern by starting the engine, then releasing the parking brake, life is good...
-
Very Active Member
Electric parking brake works best with motor running.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Some issues...
There have been some issues with the parking brake that you could search out.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Active Member
Originally Posted by Dtryke
It seems the F3 limited gets “confused”. If I turn the key on, hit the mode button to allow things to progress, then try to disable the parking brake-the computer gets confused that even though the parking brake releases, the indicator light remains on... anyone had a similar situation? If I change the pattern by starting the engine, then releasing the parking brake, life is good...
I've had EXACTLY that problem since I bought my 2016 F3L but it is very intermittent. It showed up maybe once or twice a month at random. I found two temporary 'cures' for the problem. 1/ just turn the key off - it sits there and beeps at you for 20 seconds or so, resets and then works normally until next time. 2/ Disconnect the battery, wait 30 seconds, then reconnect. Works normally until next time.
I took it back to the dealer who naturally couldn't find the problem. Eventually I caught the problem on video with an error code (P0000 - a nonsense code) and took that along too. They located a suspect module which they didn't have in stock. Two months later they replaced the suspect module and it seemed to come good. In the last 6 months it's happened once more but not since.
Good luck with yours.
Andrew
Melbourne Australia
2016 F3L Spyder
Now, wash your hands
-
Very Active Member
It would seem that if you follow the proper procedure and it doesn't happen...…..don't mess with it and do it right. Problem solved, and you are not waiting for a part.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
-
Originally Posted by Dtryke
It seems the F3 limited gets “confused”. If I turn the key on, hit the mode button to allow things to progress, then try to disable the parking brake-the computer gets confused that even though the parking brake releases, the indicator light remains on... anyone had a similar situation? If I change the pattern by starting the engine, then releasing the parking brake, life is good...
I turn on the key, release the park brake on the bike and roll it out of the garage, then put the park brake on and start it up. No issues so far doing it this way.
2016 F3 Spyder Limited SE6
2005 Honda ST1300 ABS
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|