-
RT rear boot/trunk lid fix
Hi all
Got a hit sick of holding up the rear lid while getting stuff in or out one handed. Here in Australia we call it a boot not a trunk so included both in title. Had a good look of what would hold it up without interfering with the stuff i had inside so put this together one morning. It was a couple of bits i had lying around. Don't know how it would work with stuff on the rack but its only used for less than a minute to get your stuff sorted. Check the clip out
Guy
https://youtu.be/gEYvyuHlX7Q
-
Very Active Member
Good on ya for a cheap,simple, well thought out fix.
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
-
Very Active Member
Very clever. I have the same rack and the same problem.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
-
Very Active Member
That is a GREAT fix. And, I have all the parts needed right here at home..... Jim
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
-
This is another possible solution and places less load on the edge of the trunk. https://www.canamspyderaccessories.c...-trunk-holder/
I have not financial interest in either the product or the company that makes/markets the above mentioned product.
Eckhard
Spyder RT Ltd, 2011
-
Active Member
Thinking outside the box... and easy on the shipping and handling. I love it.
-
Very Active Member
2015 RT-Ltd SE6 and F3S SE6, both with a number of commercial add-ons plus my own tweaks.
-
Very Active Member
A perfect example of creativity at its best!
On the road again...........and forever young!
2013 RT-S SE 5
Yesterday is a cancelled check.
Tomorrow is a promissory note.
Today is cash.......spend it wisely.
-
Very Active Member
It's ingenious in its simplicity.
2011 RTS (Sold to a very nice lady)
1998 Honda Valkyrie
2006 Mustang GT. Varooooom!
US Navy Veteran
SC Law Enforcement Boat Captain
CNC Machine Service Technician
President: Rolling Thunder SC1
Member: Disabled American Veterans, Rock Hill, SC
Member: American Legion
Experience is recognizing the same mistake every time you make it!
-
Very Active Member
-
Nice idea. I put a second gas strut on. Holds the lid nicely. Got it from Ovesco.
-
I appreciate the genius of the OP's solution to the lid staying up by using of what we used to call "church key" but it is bearing down on the edge that bears against the weather seal. If that edge is damaged it would allow the ingress of water and defeat the purpose of the weather seal. Those of you that choose to go that route, please check the edge to make sure it isn't damaged.
Eckhard
Spyder RT Ltd, 2011
-
Very Active Member
An ingeniously simple idea
But, bearing in mind what Eckhard said above, and also bearing in mind that I have a top case rack installed with an Apache case bolted to it, I just ordered the trunk lid holder from Can Am Spyder Accessories,
-
Very Active Member
DSCF8762.jpg
I already installed a second gas strut but no harm in extra fortification from Pierre I guess
-
Very Active Member
HIJACKING THE THREAD, FORGIVE ME... HayRog, What do you store in that TopCase? Well, really I mean how much can you store in that case?
I should have asked for examples and what made you get
1 the top rack, 2 the case, 3 the strut, and 4 the lock?
Oh, and what size is that case?
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
That's quite ingenuous! Good on ya!
I had the same problem, I just added a second strut to the other side.
Stays up no problem with a 10 lbs bag on the rack.
-
SpyderLovers Sponsor
Years ago, someone put a spring around the gas strut to hold it open( Finless?)
I like the beer bottle opener strut. Better than what is on the F3L top case!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Originally Posted by DGoebel
HIJACKING THE THREAD, FORGIVE ME... HayRog, What do you store in that TopCase? Well, really I mean how much can you store in that case?
I should have asked for examples and what made you get
1 the top rack, 2 the case, 3 the strut, and 4 the lock?
Oh, and what size is that case?
I'll PM you. Less thread hijacking ;-) I'll re-post my reply here if you think it relative.
-
Very Active Member
I ordered and installed this in replace my 2018 top case strut. The OEM strut is going on a lady friends 2017 on the right side, as hers will not hold the lid open. Two most likely will.
https://www.amazon.com/dp/B01MDPI3O9...roduct_details
https://youtube.com/shorts/Phil8lVr2wo
2018 RT Ltd - Asphalt Metallic - East Valley of Phoenix
2018 RT Ltd Chrome - Champagne Metallic - Lake Stevens, Wa
(Champagne/Hooker) Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Vredestein and PPA Orb wheels on front and General out back, and driver backrest.
Things that move between machines: Ikea sheep skins, Zumo XT GPS, and extra tools. Hooker is going to be my summer trike up North; and Hookie my winter trike down South.
(Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM driver's backrest, LED headlights, dual USB with voltmeter, dash cam, foam grips - Magic Mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.
-
Active Member
Originally Posted by ghoward54
Hi all
Got a hit sick of holding up the rear lid while getting stuff in or out one handed. Here in Australia we call it a boot not a trunk so included both in title. Had a good look of what would hold it up without interfering with the stuff i had inside so put this together one morning. It was a couple of bits i had lying around. Don't know how it would work with stuff on the rack but its only used for less than a minute to get your stuff sorted. Check the clip out
Guy
https://youtu.be/gEYvyuHlX7Q
Just what I was looking for ! Thanks for the video !!
Ray & Marci
Tenino, WA
2014RTL Cognac
ALWAYS ride 2 up.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|