-
******* Arc fog lights vs Showchrome vs Lamonster, thoughts ?
I see there are three different types of after market fog lights available, i like the looks of ******* Arc just looking for feedback in case someone owned two of the three options or better yet had a chance to try all 3.
Last edited by Peter Aawen; 04-22-2019 at 04:15 PM.
Reason: Fixed lamosnter :-)
-
Very Active Member
Me too! I like that attention grabbing DRL of the Arc lights and am waiting to hear what the jury has to say.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
I have lamonsters. They are very bright. Maybe too bright. They will make your FM radio go static when turned on so you need his filters. Ok then. Unless you don't listen to radio. Then don't need them.
-
Originally Posted by JP58
I have lamonsters. They are very bright. Maybe too bright. They will make your FM radio go static when turned on so you need his filters. Ok then. Unless you don't listen to radio. Then don't need them.
I have no radio so that wont be a problem for me
-
Member
-
Originally Posted by Outlander
Bright enough ? Do they actually do anything other than looking cool ?
-
Member
Originally Posted by donhy
Bright enough ? Do they actually do anything other than looking cool ?
I installed them so people see me.
-
I just picked up my 2018 F3 limited this weekend and looking to add one of these kits.
I'll be following this thread for sure!!
Chris
-
Active Member
I like the DRL that the SM lights have, but they do not list a lumens output, the Showchrome has by far the most lumens for the buck, and the Lamonsters are the most expensive.
None of the above offer any info on the photometrics of the luminiere, you can have all the lumens in the world but if the photometrics suck they are not worth a damn.
I should also add that I am not a fan of the color temp (6000K) of any the luminieres above 5000K is a much better color to light up the night as it is the color of daylight at noon time, too much blue at 6000K.
-
Active Member
When you install the lights, get the Can Am heat shields, they are inexpensive, less than twenty bucks, and add a finished look to the installation by filling the gaps around the lights.
-
Originally Posted by CA Railwhale
When you install the lights, get the Can Am heat shields, they are inexpensive, less than twenty bucks, and add a finished look to the installation by filling the gaps around the lights.
I was under impression that with ARC Led's there is no gap only with lamonster ones but I'm hoping to install this weekend will provide updates.
-
Active Member
Originally Posted by donhy
I was under impression that with ARC Led's there is no gap only with lamonster ones but I'm hoping to install this weekend will provide updates.
Looking forward to your update as I plan doing the fog lights too.
-
Originally Posted by ChicagoSpyder
Looking forward to your update as I plan doing the fog lights too.
Me too, it will be an exiting weekend as im doing bunch of other stuff to the F3
-
Active Member
-
Very Active Member
That is a very informative video, thanks CS.
I emailed about the Arc Fog lights, asking the following.....
+ What is the pattern? It's a true fog light, so it has a flat top.
+ Does it project down the road? Not really, since it is a fog light.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Pulled the trigger and ordered arc fog lights solely on cool factor, hopefully they are bright enough to provide extra visibilty
-
Very Active Member
Originally Posted by donhy
Pulled the trigger and ordered arc fog lights solely on cool factor, hopefully they are bright enough to provide extra visibilty
You know the arc light is on when the switch is off. So on all the time when running. When you turn switch on then you get a full round bright light. Look at the video.
-
Very Active Member
Donhy....... we will be expecting a full report sir.
I also asked them about lumens and color. I will post their response.
I do very little night riding, so I am more interested in conspicuity then illumination. So these Arc lights are at the top of my list.in
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Originally Posted by RICZ
Donhy....... we will be expecting a full report sir.
I also asked them about lumens and color. I will post their response.
I do very little night riding, so I am more interested in conspicuity then illumination. So these Arc lights are at the top of my list.in
I will have nothing else to compare them to but I will let you know my thoughts on these once i get them installed.
-
Active Member
I have a 2018 FL3. I have Lamonsters LED head lights, not happy with down the road lighting. Has anyone installed driving lights on their trike? If so what did you install and where did you mount them?
Thanks in advance.
Joe
Lamonster Bright Ryder, Lamonster Bright Tail Lighter, Lamonster H4 LED Headlights, Lamonster LED Fog Lights, Lamonster Fog Light Ring Combo, Rox Riser
Lamonster Driver Back Rest, Lamonster Frame Mount Drink Holder.
Lamonster 15" Freedom Shield Wind Shield ******* USA flag
Freecom 2 head sets
Mirror Wedgies by Squared Away
Motorcycle Dave's Tachform phone cradle
Spyderpops Turnsignal LEDs
Spyder Sisters Shade
Spyderpops LidLocs
Spyderpops front fender LEDs by Show Chrome
Motorcycle Dave's Gel seat insert
-
I have a pair of driving lights from ******* mounted inside the front fenders on my 2016 F3 L and the are great. Especially helpful when turning. be sure to mount sw within easy reach as they are very bright.
-
So i got them installed today and unfortunately there is a gap although only noticeable if you get too close i am happy with the lights but not with the gap and i think theh should stick out to the front a bit more. For price its not a bad set. Coolness factor you ant beat it.20190504_201621.jpg
-
Very Active Member
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
For those of you that have the Arc LEDs and don't like the gap is that with or without the BRP heatshields?20190601_233454.jpg
2019 F3-S SE6
Elka Stage 2 Front and Rear w/HYD
Can-am Dragbar
F4 Custom 28" Windscreen
GTR Lighting LED Headlights
Arc Led Auxiliary lights
Signature Light
BajaRon Swaybar
Akrapovic Sinister Silencer
FOBO 2 Trike TPMS
Motorcycle Dave Gel inserts Rider and Passenger
Foam Grips
-
Very Active Member
donhy....do you suppose that one can add spacers of some sort between the mounting plate and the light bracket to bring the lights out more? Or between the mounting plate and the bike?
Could you measure the distance you would like to have then moved forward and will note that when i install mine and report what I did.
Would that make the gap less obvious if they were more forward?
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|